Abstract:Direct application of the tunneling mechanism into the conventional field-effect transistor structure only results in inefficient switching behavior and high leakage current. Here, we report a vertical metal–insulator–metal (MIM) tunneling transistor employing a floating electrode to achieve an efficient switching behavior and substantially low leakage current simultaneously. This switching method utilizes a tunneling mechanism transition between direct and Fowler–Nordheim tunneling by placing the floating electrode into a vertical tunneling channel. Engineering the electrical potential of the floating electrode with coplanar dual gates enables the efficient control of the tunneling mechanism transition. This particular arrangement of the gate and source/drain (no overlap) allows an extremely low gate leakage current (∼10–13 A). This value is significant in the tunneling transistor and promising for future electrical devices with low-power consumption. Furthermore, tunneling, whose operating principle is fundamentally different from the p–n junction and Schottky barrier in the Si transistor, has been proposed as a solution to tackle the issues such as high-frequency driving, power consumption, and so on. This structure is a strong candidate for ultrahigh-frequency driving because of its extremely low structural capacitance (∼1.5 zF). An additional electrical status can be shown to generate ternary or more statuses in a single transistor. Its electrical performance is expected to not only harmonize with THz communication systems, control process units, and high-speed electrical systems but also contributes a degree of integration. Moreover, the simple and low-temperature fabrication process of the vertical MIM tunneling transistor is advantageous for low-cost electrical devices and flexible electronic applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaelm.0c00409.Comparison with the conventional FET structure, theoretical investigation of the vertical MIM tunneling transistor, geometric effect on potential energy and the tunneling probability equation, tunneling theory and equations, fabrication process, material analysis, switching behavior of the vertical MIM tunneling transistor, lateral tunneling transistor with sharp tips, thickness dependence of the floating electrode for the gate effect, expected cut-off frequency, temperature dependence, appendix (PDF)This article has not yet been cited by other publications.

Tunnel field-effect transistors as energy-efficient electronic switches

Energy-Efficient Tunneling Field-Effect Transistors for Low-Power Device Applications: Challenges and Opportunities

Dirac-source Field-Effect Transistors As Energy-Efficient, High-Performance Electronic Switches

Tunneling towards efficiency: A survey of design and optimization strategies for tunnel FETs in ultra-low power applications

Dirac Electrons at the Source: Breaking the 60-Mv/decade Switching Limit

A next-generation transistor with low supply voltage operation constructed based on 2D materials' metal-semiconductor phase transition

Cold source field-effect transistors: Breaking the 60-mV/decade switching limit at room temperature

Digital-circuit Analysis of Short-Gate Tunnel FETs for Low-Voltage Applications

A Novel High-Performance Planar InAs/GaSb Face-Tunneling FET With Implanted Drain for Leakage Current Reduction

2D Steep‐Slope Tunnel Field‐Effect Transistors Tuned by van der Waals Ferroelectrics

Tunneling Junction as Cold Source: Toward Steep-Slope Field-Effect Transistors Based on Monolayer MoS 2

Performance comparison between p-i-n tunneling transistors and conventional MOSFETs

Switching Behavior in a Vertical Tunneling Transistor by Tunneling Mechanism Transition and Floating Electrode Structure

p-i-n Tunnel FETs vs. n-i-n MOSFETs: Performance Comparison from Devices to Circuits

Atomic Threshold-Switching Enabled MoS2 Transistors Towards Ultralow-Power Electronics

Sharp-Switching High-Current Tunneling Devices

Energy-efficient transistors: suppressing the subthreshold swing below the physical limit

Low-Voltage Tunnel Transistors for Beyond CMOS Logic

2D Short‐Channel Tunneling Transistor Relying on Dual‐Gate Modulation for Integrated Circuits Application

Atomically Thin Van Der Waals Tunnel Field-Effect Transistors and Its Potential for Applications

Novel Tunnel- and Ferroelectric-based Devices by Mechanism Engineering for Ultra-Low Power Applications