Abstract:The short‐channel tunneling transistor comprising all 2D components is developed, exhibiting high switching performance due to the energy band modulation of vertical heterojunction through the dual‐gates. Leveraging the unique short‐channel and tunneling mechanism, it can circumvent the general issues of voltage spikes and long reverse recovery time, realizing an access to high‐frequency integrated circuits (IC) interface. With continuous size scaling, the surface dangling bonds and short‐channel effects will degrade silicon based transistor performance. Thus, it is of great importance to seek new channel materials and transistor architectures to further continue Moore's law. Herein, a new ultra‐thin short‐channel tunneling transistor is developed comprising all 2D‐ components. Distinct from usual 2D planar transistor, this device is configured with vertical MoS2/WSe2 junction and in‐plane WSe2 channel, the switch states are realized by the gate‐regulated barrier height of heterojunction, enabling the transition of transport mechanism between thermionic‐emission and tunneling. Under dual‐gate configuration, the transistor exhibits high performance with drive current of 4.58 μA, on/off ratio of 4 × 107, subthreshold swing (SS) of 97 mV decade−1 and drain‐induced barrier lowering (DIBL) of 12 mV V−1, that can meet the requirement of logical applications in integrated circuits (IC). Taking advantage of the high‐speed tunneling current and unique short‐channel architecture, the device overcomes the issues of voltage spikes and long reverse recovery time that exist in usual electric components, and thus gains an access to the IC interface. This work provides a proof‐of‐concept transistor architecture relying on dual‐gate modulation, opening up a promising perspective for next generation low‐power, high‐density, and large‐scale IC technologies.

Low-Voltage Tunnel Transistors for Beyond CMOS Logic

Complementary tunneling transistor for low power application

Energy-Efficient Tunneling Field-Effect Transistors for Low-Power Device Applications: Challenges and Opportunities

Characteristic Enhancement in Tunnel Field-Effect Transistors Via Introduction of Vertical Graded Source

Tunneling towards efficiency: A survey of design and optimization strategies for tunnel FETs in ultra-low power applications

High performance tunnel field-effect transistor by gate and source engineering.

A Novel Tunnel FET Design Through Adaptive Bandgap Engineering with Constant Sub-Threshold Slope over 5 Decades of Current and High $\text{i}_{\mathrm {on}}/\text{i}_{\mathrm {OFF}}$ Ratio

Experimental Investigation of a Novel Junction-Modulated Hetero-Layer Tunnel FET with the Striped Gate for Low Power Applications.

Numerical Study on a Lateral Double-Gate Tunnelling Field Effect Transistor

2D Steep‐Slope Tunnel Field‐Effect Transistors Tuned by van der Waals Ferroelectrics

High Performance Tunnel Field Effect Transistor with a Tri-Material-gate Structure

New Prospects on High On-Current and Steep Subthreshold Slope for Innovative Tunnel FET Architectures

On the possibility of obtaining MOSFET-like performance and sub-60 mV/decade swing in 1D broken-gap tunnel transistors

Numerical Simulation on Novel Nano-Scale Lateral Double-Gate Tunneling Field Effect Transistor

Low-power High-Speed Current Mode Logic Using Tunnel-FETs

Digital-circuit Analysis of Short-Gate Tunnel FETs for Low-Voltage Applications

2D materials-based nanoscale tunneling field effect transistors: current developments and future prospects

Complementary Tunneling-FETs (CTFET) in CMOS Technology

Towards ultralow-power and high-speed electronics: Tunnel transistor based on single-chain Tellurium

2D Short‐Channel Tunneling Transistor Relying on Dual‐Gate Modulation for Integrated Circuits Application

Tunnel Field-Effect Transistor: Impact of the Asymmetric and Symmetric Ambipolarity on Fault and Performance in Digital Circuits