Abstract:Fiber-reinforced biological soft tissues are often modeled as anisotropic hyperelastic materials. Four strain invariants can be used to define a strain energy function for soft tissues reinforced with a single fiber family: two isotropic invariants I 1 , I 2 and two anisotropic invariants I 4 , I 5 . Invariant I 5 is often omitted in the strain energy functions to simplify the problem mathematically. In this study, the implications of using only I 4 or the use of both anisotropic invariants I 4 , I 5 in the numerical modeling of soft tissues were analyzed. A simple modification to the Holzapfel–Gasser–Ogden (HGO) model is proposed by adding a term that contains invariant I 5 . Material parameters were calculated by fitting the models with experimental data of uniaxial traction in the tibialis anterior tendon tissue of rats. General analytical solutions for the simple load scenarios were obtained. Such solutions are taken as a reference point to measure the precision of the numerical results obtained in the finite element simulations. The main differences between the models were observed in the shear behavior. The proposed model predicts three different shear responses (two responses with fiber reinforcement and one isotropic response), while the HGO model predicts two equal isotropic responses and only one with fiber reinforcement. Two sets of simple shear experimental data on a fiber-reinforced elastomer material were used to verify the shear stress prediction of the models. The experimental data show that the three shear behaviors are different; thus, the HGO model offers a limited description of the shear behavior. Furthermore, analytical solutions and experimental data suggest that invariant I 5 is related to the elastic energy of the fibers when the material is subjected to shear in a direction parallel to the fibers. The models for non-homogeneous deformations were also compared. For this comparison, an irregular geometry was implemented in ABAQUS, and the traction and shear conditions were simulated by changing the fiber inclination. The most critical difference was found when the shear was parallel to the direction of the fiber and the minor difference when the fiber was at 45° to the load force.

On the Modeling of Extension-Torsion Experimental Data for Transversely Isotropic Biological Soft Tissues

Interpretation of Torsional Shear Results for Nonlinear Stress–strain Relationship

Pure Torsion for Stretch-Based Constitutive Models for Incompressible Isotropic Hyperelastic Soft Materials

The effect of fiber-matrix interaction on the kinking instability arising in the torsion of stretched fibrous biofilaments

Torsion Instability of Anisotropic Cylindrical Tissues with Growth

Role of anisotropic invariants in numerically modeling soft biological tissues as transversely isotropic hyperelastic materials: A comparative study

The Use of Contravariant Tensors to Model Anisotropic Soft Tissues

Torsion and Bistability of Double-Twist Elastomers

Comparison of theoretical elastic couple stress predictions with physical experiments for pure torsion

A Finite-Strain Micromechanical Model for the Hyperelasticity of Tendons and Ligaments with Crimped Fibers

Elasticity of thin rods with spontaneous curvature and torsion - beyond geometrical lines

Anisotropic and viscoelastic tensile mechanical properties of aponeurosis: Experimentation, modeling, and tissue microstructure

At least three invariants are necessary to model the mechanical response of incompressible, transversely isotropic materials

Mechanical behavior of crimped collagen fibers under uniaxial tension

Size Effects of Hair-Sized Structures – Torsion

Control of Tension-Compression Asymmetry in Ogden Hyperelasticity with Application to Soft Tissue Modelling

Large deformation analysis of some basic problems in biophysics

A novel hyperelastic model for biological tissues with planar distributed fibers and a second kind of Poisson effect

The large strain snap-through effect in free torsion of highly elastic soft thin-walled tubes with exact closed-form solutions

Dynamic mechanical analysis with torsional rectangular geometry: A critical assessment of constrained warping models