Abstract:Fiber-reinforced biological soft tissues are often modeled as anisotropic hyperelastic materials. Four strain invariants can be used to define a strain energy function for soft tissues reinforced with a single fiber family: two isotropic invariants I 1 , I 2 and two anisotropic invariants I 4 , I 5 . Invariant I 5 is often omitted in the strain energy functions to simplify the problem mathematically. In this study, the implications of using only I 4 or the use of both anisotropic invariants I 4 , I 5 in the numerical modeling of soft tissues were analyzed. A simple modification to the Holzapfel–Gasser–Ogden (HGO) model is proposed by adding a term that contains invariant I 5 . Material parameters were calculated by fitting the models with experimental data of uniaxial traction in the tibialis anterior tendon tissue of rats. General analytical solutions for the simple load scenarios were obtained. Such solutions are taken as a reference point to measure the precision of the numerical results obtained in the finite element simulations. The main differences between the models were observed in the shear behavior. The proposed model predicts three different shear responses (two responses with fiber reinforcement and one isotropic response), while the HGO model predicts two equal isotropic responses and only one with fiber reinforcement. Two sets of simple shear experimental data on a fiber-reinforced elastomer material were used to verify the shear stress prediction of the models. The experimental data show that the three shear behaviors are different; thus, the HGO model offers a limited description of the shear behavior. Furthermore, analytical solutions and experimental data suggest that invariant I 5 is related to the elastic energy of the fibers when the material is subjected to shear in a direction parallel to the fibers. The models for non-homogeneous deformations were also compared. For this comparison, an irregular geometry was implemented in ABAQUS, and the traction and shear conditions were simulated by changing the fiber inclination. The most critical difference was found when the shear was parallel to the direction of the fiber and the minor difference when the fiber was at 45° to the load force.

A novel hyperelastic model for biological tissues with planar distributed fibers and a second kind of Poisson effect

A Constitutive Model for Mechanical Behaviors of Novel Double Network Hydrogels with Mechanophores

A Micromechanics Finite-Strain Constitutive Model of Fibrous Tissue.

A residual stiffness-based model for the fatigue damage of biological soft tissues

A composites-based hyperelastic constitutive model for soft tissue with application to the human annulus fibrosus

A multiscale viscoelastic fiber dispersion model for strain rate-dependent behavior of planar fibrous tissues

Logarithmic rate based elasto-viscoplastic cyclic constitutive model for soft biological tissues

A Micro-Structure Based Constitutive Model for Anisotropic Stress–strain Behaviors of Artery Tissues

A model for one-dimensional morphoelasticity and its application to fibroblast-populated collagen lattices

Coupled electro-mechanical models of fiber-distributed active tissues

An anisotropic hyperelastic constitutive model considering shear-tension coupling for 2-dimensional woven fabrics

A Finite-Strain Micromechanical Model for the Hyperelasticity of Tendons and Ligaments with Crimped Fibers

Hyperelastic modelling of arterial layers with distributed collagen fibre orientations

Role of anisotropic invariants in numerically modeling soft biological tissues as transversely isotropic hyperelastic materials: A comparative study

A mesostructurally-based anisotropic continuum model for biological soft tissues--decoupled invariant formulation

Non-linear Micromechanics of Soft Tissues

On Constitutive Modelling of Porous Neo-Hookean Composites

Strong triaxial coupling and anomalous Poisson effect in collagen networks

Nonlinear viscoelastic, thermodynamically consistent, models for biological soft tissue

An Anisotropic Visco-hyperelastic Model Predicting Short-term Strain-rate Dependent Response of Soft Tissues

An Anisotropic Hyperelastic Constitutive Model with Tension–Shear Coupling for Woven Composite Reinforcements