Abstract:Fiber-reinforced biological soft tissues are often modeled as anisotropic hyperelastic materials. Four strain invariants can be used to define a strain energy function for soft tissues reinforced with a single fiber family: two isotropic invariants I 1 , I 2 and two anisotropic invariants I 4 , I 5 . Invariant I 5 is often omitted in the strain energy functions to simplify the problem mathematically. In this study, the implications of using only I 4 or the use of both anisotropic invariants I 4 , I 5 in the numerical modeling of soft tissues were analyzed. A simple modification to the Holzapfel–Gasser–Ogden (HGO) model is proposed by adding a term that contains invariant I 5 . Material parameters were calculated by fitting the models with experimental data of uniaxial traction in the tibialis anterior tendon tissue of rats. General analytical solutions for the simple load scenarios were obtained. Such solutions are taken as a reference point to measure the precision of the numerical results obtained in the finite element simulations. The main differences between the models were observed in the shear behavior. The proposed model predicts three different shear responses (two responses with fiber reinforcement and one isotropic response), while the HGO model predicts two equal isotropic responses and only one with fiber reinforcement. Two sets of simple shear experimental data on a fiber-reinforced elastomer material were used to verify the shear stress prediction of the models. The experimental data show that the three shear behaviors are different; thus, the HGO model offers a limited description of the shear behavior. Furthermore, analytical solutions and experimental data suggest that invariant I 5 is related to the elastic energy of the fibers when the material is subjected to shear in a direction parallel to the fibers. The models for non-homogeneous deformations were also compared. For this comparison, an irregular geometry was implemented in ABAQUS, and the traction and shear conditions were simulated by changing the fiber inclination. The most critical difference was found when the shear was parallel to the direction of the fiber and the minor difference when the fiber was at 45° to the load force.

Pure Torsion for Stretch-Based Constitutive Models for Incompressible Isotropic Hyperelastic Soft Materials

On the Modeling of Extension-Torsion Experimental Data for Transversely Isotropic Biological Soft Tissues

A Constitutive Model for Strain Hardening Behavior of Predeformed Amorphous Polymers: Incorporating Dissipative Dynamics of Molecular Orientation

A hyperelastic constitutive model for soft elastomers considering the entanglement-dependent finite extensibility

On Modelling Simple Shear for Isotropic Incompressible Rubber-Like Materials

Control of Tension-Compression Asymmetry in Ogden Hyperelasticity with Application to Soft Tissue Modelling

On a new class of non-Gaussian molecular-based constitutive models with limiting chain extensibility for incompressible rubber-like materials

Role of anisotropic invariants in numerically modeling soft biological tissues as transversely isotropic hyperelastic materials: A comparative study

Energetically stable curve fitting to hyperelastic models based on uniaxial and biaxial tensile tests

A simple interpolation-based approach towards the development of an accurate phenomenological constitutive relation for isotropic hyperelastic materials

Model-free data-driven inelasticity in Haigh-Westergaard space -- a study how to obtain data points from measurements

A novel hyperelastic model for biological tissues with planar distributed fibers and a second kind of Poisson effect

An in silico-based review on anisotropic hyperelastic constitutive models for soft biological tissues

An Anisotropic Constitutive Relationship by a Series of 8 Chain Models

A Wrinkling Model for General Hyperelastic Materials based on Tension Field Theory

An Anisotropic Micro-Sphere Approach Applied to the Modelling of Soft Biological Tissues

Size Effects of Hair-Sized Structures – Torsion

Anisotropic Two-Dimensional, Plane Strain, and Plane Stress Models in Classical Linear Elasticity and Bond-Based Peridynamics

New two-parameter constitutive models for rubber-like materials: Revisiting the relationship between single chain stretch and continuum deformation

At least three invariants are necessary to model the mechanical response of incompressible, transversely isotropic materials

A physically based visco-hyperelastic constitutive model for soft materials