Abstract:Fiber-reinforced biological soft tissues are often modeled as anisotropic hyperelastic materials. Four strain invariants can be used to define a strain energy function for soft tissues reinforced with a single fiber family: two isotropic invariants I 1 , I 2 and two anisotropic invariants I 4 , I 5 . Invariant I 5 is often omitted in the strain energy functions to simplify the problem mathematically. In this study, the implications of using only I 4 or the use of both anisotropic invariants I 4 , I 5 in the numerical modeling of soft tissues were analyzed. A simple modification to the Holzapfel–Gasser–Ogden (HGO) model is proposed by adding a term that contains invariant I 5 . Material parameters were calculated by fitting the models with experimental data of uniaxial traction in the tibialis anterior tendon tissue of rats. General analytical solutions for the simple load scenarios were obtained. Such solutions are taken as a reference point to measure the precision of the numerical results obtained in the finite element simulations. The main differences between the models were observed in the shear behavior. The proposed model predicts three different shear responses (two responses with fiber reinforcement and one isotropic response), while the HGO model predicts two equal isotropic responses and only one with fiber reinforcement. Two sets of simple shear experimental data on a fiber-reinforced elastomer material were used to verify the shear stress prediction of the models. The experimental data show that the three shear behaviors are different; thus, the HGO model offers a limited description of the shear behavior. Furthermore, analytical solutions and experimental data suggest that invariant I 5 is related to the elastic energy of the fibers when the material is subjected to shear in a direction parallel to the fibers. The models for non-homogeneous deformations were also compared. For this comparison, an irregular geometry was implemented in ABAQUS, and the traction and shear conditions were simulated by changing the fiber inclination. The most critical difference was found when the shear was parallel to the direction of the fiber and the minor difference when the fiber was at 45° to the load force.

Energetically stable curve fitting to hyperelastic models based on uniaxial and biaxial tensile tests

A Comparative Study of the Entanglement Models Toward Simulating Hyperelastic Behaviors

A new strain energy function for the hyperelastic modelling of ligaments and tendons based on fascicle microstructure

Elastica-based strain energy functions for soft biological tissue

Need for transverse strain data for fitting constitutive models of arterial tissue to uniaxial tests

A new strain energy function for modelling ligaments and tendons whose fascicles have a helical arrangement of fibrils

Visco-hyperelastic material model fitting to experimental stress-strain curves using a genetic algorithm and its application to soft tissue simulants

Parameter-free Strain-Energy Function Which Automatically and Accurately Matches Benchmark Test Data for Soft Elastic Solids

An in silico-based review on anisotropic hyperelastic constitutive models for soft biological tissues

A simple interpolation-based approach towards the development of an accurate phenomenological constitutive relation for isotropic hyperelastic materials

A consistent transversely-isotropic hyper-viscoelastic model: Finite element implementation and mechanical characterization of biological tissues

Modeling fatigue failure in soft tissue using a visco-hyperelastic model with discontinuous damage

General Framework to Implement Isotropic and Anisotropic Hyperelastic Biomaterials into Finite Element Method

A hyperelastic constitutive model for soft elastomers considering the entanglement-dependent finite extensibility

Logarithmic rate based elasto-viscoplastic cyclic constitutive model for soft biological tissues

An Anisotropic Visco-hyperelastic Model Predicting Short-term Strain-rate Dependent Response of Soft Tissues

Hyperelastic Energy Densities for Soft Biological Tissues: A Review

Role of anisotropic invariants in numerically modeling soft biological tissues as transversely isotropic hyperelastic materials: A comparative study

A visco-hyperelastic model for skeletal muscle tissue under high strain rates.

An approach to quantification of biaxial tissue stress-strain data

Nonlinear viscoelastic, thermodynamically consistent, models for biological soft tissue