Abstract:Many attempts have been made to reproduce theoretically the stress–strain curves obtained from experiments on the isothermal deformation of highly elastic ‘rubberlike' materials. The existence of a strain-energy function has usually been postulated, and the simplifications appropriate to the assumptions of isotropy and incompressibility have been exploited. However, the usual practice of writing the strain energy as a function of two independent strain invariants has, in general, the effect of complicating the associated mathematical analysis (this is particularly evident in relation to the calculation of instantaneous moduli of elasticity) and, consequently, the basic elegance and simplicity of isotropic elasticity is sacrificed. Furthermore, recently proposed special forms of the strain-energy function are rather complicated functions of two invariants. The purpose of this paper is, while making full use of the inherent simplicity of isotropic elasticity, to construct a strain-energy function which: (i) provides an adequate representation of the mechanical response of rubberlike solids, and (ii) is simple enough to be amenable to mathematical analysis. A strain-energy function which is a linear combination of strain invariants defined by φ ( α ) = ( a 1 α + a 2 α + a 3 α –3)/ α is proposed; and the principal stretches a 1 , a 2 and a 3 are used as independent variables subject to the incompressibility constraint a 1 a 2 a 3 = 1. Principal axes techniques are used where appropriate. An excellent agreement between this theory and the experimental data from simple tension, pure shear and equibiaxial tension tests is demonstrated. It is also shown that the present theory has certain repercussions in respect of the constitutive inequality proposed by Hill (1968 a , 1970 b ).

Large deformation analysis of some basic problems in biophysics

Large Deformation of Hyperelastic Thick-Walled Vessels under Combined Extension-Torsion-pressure: Analytical Solution and FEM

Finite Deformation Analysis of Bi-Modulus Thermoelastic Structures and Its in of Membranes

Finite deformation analysis of bi-modulus thermoelastic structures and its application in wrinkling prediction of membranes

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

Buckling of a Stiff Thin Film on a Compliant Substrate in Large Deformation

Tension-compression Asymmetry at Finite Strains: A Theoretical Model and Exact Solutions

Viscoelasticity in Large Deformation Analysis of Hyperelastic Structures

Elastica-based strain energy functions for soft biological tissue

Exactly isochoric deformations of soft solids

Strain softening and hysteresis arising from 3D multicellular dynamics during long-term large deformation

Instabilities in elastomers and soft tissues

Large deformation isotropic elasticity – on the correlation of theory and experiment for incompressible rubberlike solids

On the Modeling of Active Deformation in Biological Transversely Isotropic Materials

Strain-dependent internal parameters in hyperelastic biological materials

Exact Large Strain Analysis for the Poynting Effect of Freely Twisted Thin-Walled Tubes Made of Highly Elastic Soft Materials

Analytical and numerical analyses of the micromechanics of soft fibrous connective tissues

Large deformation and wrinkling analyses of bimodular structures and membranes based on a peridynamic computational framework

Nonlinear viscoelastic, thermodynamically consistent, models for biological soft tissue

On the Modeling of Extension-Torsion Experimental Data for Transversely Isotropic Biological Soft Tissues

Data Fitting and Simulation of Hyperelastic and Viscoelastic Properties of Soft Tissue