Abstract:This paper describes the results of the first phase of a study on the sheet metal response in a car structure subjected to impact loads produced during a crash. A mathematical model of thin elasto-plastic (material nonlinearity) shells with large deflection (geometrical nonlinearity) is used to model the sheet metal. In this part of the work, the stresses and deformations in a thin shell are determined under equivalent static loads so that the deformation theory of plasticity can be applied in the formulation.Based upon the nonlinear shell theory and the deformation theory of plasticity, the potential energy functional for a shell structure is derived in a curvilinear coordinate system. Using curved triangular elements, the potential energy functional is reduced to the potential energy function of the nodal displacements. The gradient search method is applied to find a set of nodal displacements such that the potential energy function is a minimum; thus this set is the solution to the shell structure. The most severe problem that one encounters when applying the energy search method to solve structural problems with both material and geometrical nonlinearities is slow convergence. To improve this slow convergence near the end of the search process, the intermediate solution from the search process obtained prior to the onset of slow convergence is used as an initial guess input to the “Alpha”-Constant Stiffness Method. Both solution accuracy and overall computer time are improved with this procedure.The combined method is applied to solve three sample problems for which solutions exist in the literature to demonstrate its accuracy and economy in computer time. In addition, the load-deflection curve is computed numerically for a cylindrical panel under a concentrated load at the center. These results were also checked with the force-deflection curve from an actual experimental test of the panel and excellent agreement was observed.

Viscoelasticity in Large Deformation Analysis of Hyperelastic Structures

Large Deformation of Hyperelastic Thick-Walled Vessels under Combined Extension-Torsion-pressure: Analytical Solution and FEM

Non-Linear Mathematical Model Of Viscoelastic Thin Plates With Its Applications

On finite bending of visco-hyperelastic materials: a novel analytical solution and FEM

An enhanced mid-surface method for large deformation and large overall motion of hyperelastic thin plate without locking

Large deformation analysis of some basic problems in biophysics

Elasto-plastic and large deformation analysis of thin shells by the deformation theory of plasticity

An Approach to Elastoplasticity at Large Deformations

Isogeometric analysis of hyperelastic Timoshenko beams under large deformation and incompressibility constraints

Research of Viscoelastic Large Deformation Plane Problems

A large deformation theory for rate-dependent elastic–plastic materials with combined isotropic and kinematic hardening

Elasto-plastic large deformation analysis of multi-patch thin shells by isogeometric approach

Elasto-plasticity theory for large plastic deformation and its use for the material stiffness determination

The Finite-Element Method Of 3-Dimensional Nonlinear Viscoelastic Large-Deformation Problems

Extracting non-equilibrium material properties in visco-hyperelastic polymers based on analytical stress solution

A Micro–macro Constitutive Model for Finite-Deformation Viscoelasticity of Elastomers with Nonlinear Viscosity

Large deformations of hyperelastic curved beams based on the absolute nodal coordinate formulation

Large Elastic Deformations of Soft Solids Up to Failure: New Hyperelastic Models with Error Estimation

Analytical Solutions for Large-Deflection Bending of Variable-Thickness Inhomogeneous Functional Graded Composite Circular Plates with Parameterized Boundaries under Hygro-Thermo-mechanical Loads

An elastic-viscoplastic model for large deformation

Three-Dimensional Viscoelastic Large Deformation Analysis By Using A Total Lagrangian Incremental Finite Element Method