Abstract:When a flaw is detected in austenitic piping during in-service inspection, the limit load criterion given in the codes such as JSME Rules on Fitness-for-Service for Nuclear Power Plants or ASME Boiler and Pressure Vessel Code Section XI can be applied to evaluate the structural integrity of the piping. Considering that a cracked pipe is subjected to tensile load and/or bending moment, limit load (moment) for ductile material can be well predicted based on the net-section-collapse criterion derived from the equilibrium of the admissible stress distribution on the ligament of the cracked section. Actual piping is generally subjected to combined tensile, bending, and torsional loadings, however, a methodology to evaluate limit moment for torsion is not established due to the inadequacy of experimental validation. In this study, fracture tests for circumferentially cracked cylinders subjected to torsional moment were conducted. Tested material was austenitic stainless steel, and the shape and size of crack were variable. Experimental maximum moments were compared with the limit moments, which were evaluated based on the concept of the net-section-collapse criterion for torsional moment. The maximum moments could be conservatively predicted by the net-section-collapse criterion. In addition, an innovative test method was developed to conduct torsional tests using a pair of Charpy V-notch specimens and a conventional test machine. The adequacy of the replacement of cracks with machined notches for ductile materials under torsional loading was investigated through the comparison of the fracture behavior obtained from notched and precracked Charpy specimens. The developed method could be an alternative test method for torsional moment.

Prediction of Fatigue Crack Propagation Path from a Pre-Crack under Combined Torsional and Axial Loading

Prediction of Fatigue Life Based on Small Crack Growth Law.

Short Fatigue-Crack Growth from Crack-like Defects under Completely Reversed Loading Predicted Based on Cyclic R-Curve

Life prediction method based on short crack propagation considering additional damage under axial-torsional non-proportional loading

Simple Predicting Method for Fatigue Crack Growth Rate Based on Tensile Strength of Carbon Steel

Static Axial Tension or Compression Stress Effects on Shear Cracks Initiating under Cyclic Torsion Loads in Multiaxial Fatigue Tests

Determination of cyclic R-curve for predicting short fatigue crack growth

Evaluation Of Excessive Loading Effect On Fatigue Crack Growth Behavior Based On Crack Blunting And Stress Distribution In Front Of The Crack Tip

A Novel Method for Characterizing the Fatigue Crack Propagation of Steel Via the Weak Magnetic Effect

ICONE19-43356 NET-SECTION-COLLAPSE OF CIRCUMFERENTIALLY CRACKED CYLINDERS SUBJECTED TO TORSIONAL MOMENT

Prediction of crack shape in a cylindrical bar under combined fatigue tension and torsion loading

Statistical Analysis Methods of Fatigue Crack Growth Rate

Propagation Behavior of Small Fatigue Crack in Carbon Steel Thin Film under Cyclic Pure Shear Loading.

Unified Evaluation of Fatigue Crack Growth Rates under Rotating Bending and Plane Bending.

Prediction of Location of Fretting Fatigue Crack Initiation Subject to High Stress Ratio Cyclic Load

Evaluation Method of Fatigue Crack Growth Rates at Various Stress Rations. Investigation Based on Small Crack Growth Law.

Fatigue Crack Growth for Ferritic Steel under Negative Stress Ratio

Fatigue Crack Propagation in Heterogeneous Materials under Remote Cyclic Loading

Experimental Investigation of Failure Estimation Method for Stainless Steel Pipes with A Circumferential Crack Subjected to Combined Tensile and Torsion Loads

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

Fatigue Crack Growth Behavior of CP-Ti Cruciform Specimens with Mixed Mode I-II Crack under Biaxial Loading