Abstract:The crack closure concept is often used to consider the R-ratio and overload effects on fatigue crack growth. The presumption is that when the crack is closed, the external load produces negligible fatigue damage in the cracked component. The current investigation provides a reassessment of the frequently used concept with an emphasis on the plasticity-induced crack closure. A center cracked specimen made of 1070 steel was investigated. The specimen was subjected to plane-stress mode I loading. An elastic–plastic stress analysis was conducted for the cracked specimens using the finite element method. By applying the commonly used one-node-per-cycle debonding scheme for the crack closure simulations, it was shown that the predicted crack opening load did not stabilize when the extended crack was less than four times of the plastic zone size. The predicted opening load was strongly influenced by the plasticity model used. When the elastic–perfectly plastic (EPP) stress–strain relationship was used together with the kinematic hardening plasticity theory, the predicted crack opening load was found to be critically dependent on the element size of the finite element mesh model. For R=0, the predicted crack opening load was greatly reduced when the finite element size became very fine. The kinematic hardening rule with the bilinear (BL) stress–strain relationship predicted crack closure with less dependence on the element size. When a recently developed cyclic plasticity model was used, the element size effect on the predicted crack opening level was insignificant. While crack closure may occur, it was demonstrated that cyclic plasticity persisted in the material near the crack tip. The cyclic plasticity was reduced but not negligible when the crack was closed. The traditional approaches may have overestimated the effect of crack closure in fatigue crack growth predictions.

Determination of cyclic R-curve for predicting short fatigue crack growth

Short Fatigue-Crack Growth from Crack-like Defects under Completely Reversed Loading Predicted Based on Cyclic R-Curve

Cyclic R‐curve measurements for structural metallic alloys

Prediction of Fatigue Crack Propagation Path from a Pre-Crack under Combined Torsional and Axial Loading

Modeling of Fatigue Crack Propagation

A reexamination of plasticity-induced crack closure in fatigue crack propagation

Improved Modeling of the Effect of R-ratio on Crack Growth Rate

Modeling of fatigue crack growth from a notch

Creep crack growth prediction using a damage based approach

A New Approach to Predicting Fatigue Crack Propagation

Cyclic Plasticity and Fatigue Crack Growth

A Study of Crack Growth Retardation Due to Artificially Induced Crack Surface Contact

In-situ observation of strain evolution and ratchetting of growing fatigue cracks

Evaluation Method of Fatigue Crack Growth Rates at Various Stress Rations. Investigation Based on Small Crack Growth Law.

A Plastic Fracture Mechanics Model for Characterization of Multiaxial Low-Cycle Fatigue

Prediction of Short Fatigue Crack Propagation Behaviour by Characterization of Both Plasticity and Roughness Induced Crack Closures

A new model of the fatigue crack growth threshold

Experimental Study on the Dynamic J-Resistance Curve of Crack Growth of Elastic-Plastic Materials

Fatigue Crack Growth for A Surface Crack in A Round Bar under Multi-Axial Loading Condition

Fatigue Crack Growth Prediction Based on Unique Crack Growth Rate Curve Model

Modeling and calculation of the fatigue crack growth life in structural steels