Abstract:The present experimental study assesses the mechanical properties of glass/carbon/glass hybrid composite laminates after being exposed to moisture in a deep freezer and elevated temperatures for extended periods. The top and bottom layers of the hybrid laminates are reinforced with glass fibre, and the middle layer is reinforced with carbon fibre using the epoxy matrix as a binder polymer material. The hybrid laminates were manufactured using the resin transfer moulding method, and their compressive and tensile properties were determined using a tensile testing machine. The storage modulus, loss modulus, and damping factors of all groups of laminates were identified using a dynamic mechanical analysis as a function of temperature and vibration frequency. The experimental results on compressive and tensile properties revealed slight variations when the hybrid laminates were kept at low temperatures in a deep freezer for extended periods. This might occur due to the increasing molecular crosslinking of the polymer network. As the testing temperature increased, compressive, tensile, storage modules, loss modulus, and damping factors decreased. This might occur due to the increasing mobility of the binder material. Particularly, the highest stiffness parameters were obtained at −80 °C/GCG (glass/carbon/glass) laminates due to the presence of a beta transition in the glassy region. The relationships between the glass transitions and the targeted frequencies were characterized. The values of the glass transition shift towards higher temperatures as the frequency increases. This might occur due to a reduction in the gaps between the crosslinking of the epoxy network when the frequency increases. The accuracy of the storage modulus results was compared with the empirical models. The model based on the Arrhenius law provided the closest correlation. Meanwhile, another model was observed that was not accurate enough to predict when gamma and beta relaxations occur in a glassy state.

Investigation of the curing behaviour of carbon fibre epoxy prepreg by Dynamic Mechanical Analysis DMA

Carbon-fibre epoxy prepreg (CFC) curing in an autoclave analogue process controlled by Dynamic Mechanical Analysis (DMA)

Dynamic Mechanical Analysis (DMA) of epoxy carbon-fibre prepregs partially cured in a discontinued autoclave analogue process

Study of Post-curing Properties of Wood Flour Reinforced Phenolic Molding Materials

The Curing Behavior and Properties of Diglycidyl Ether of 4,4′-Bis(4-hydroxybenzoyloxy)-3,3′,5,5′-tetramethylbiphenyl and Its Composites with Multi-Wall Carbon Nanotubes

Characterisation of bending mechanics in uncured laminated materials using a modified Dynamic Mechanical Analysis

Studies on Cure Kinetics of Diglycidyl Ether of 4,4′-Bisphenol/4,4′-diaminobiphenyl Using the Advanced Isoconversional Method

Performance Evaluation of Out-of-Spec Carbon Prepregs for Upcycling Purposes

The Dynamic Constants of Unidirectional Fibrous Composites at the Glass Transition Region as Obtained from the Interphase Concept

Thermal Characterization of Carbon‐nanofiber‐reinforced Tetraglycidyl‐4,4′‐diaminodiphenylmethane/4,4′‐diaminodiphenylsulfone Epoxy Composites

In‐situ investigation of dielectric properties and reaction kinetics of a glass‐fiber‐reinforced epoxy composite material using dielectric analysis

A new approach for determination of gel time of a glass/epoxy prepreg

Effects of storage aging on the cure kinetics of T700/BMI prepregs

Dynamic mechanical analysis (DMA) in fiber research

Magnetic Fiber Enabled Curing Electrogram: Real-time Process Monitoring for Thermosetting Polymer Materials

Dielectric and rheological study of the molecular dynamics during the cure of an epoxy resin

Cure Kinetic Study of Carbon Nanofibers/Epoxy Composites by Isothermal Dsc

Dynamic mechanical properties of graphene and carbon fabric‐reinforced epoxy nanocomposites

Empirical model for the effect of air humidity during manufacturing on the glass transition temperature of carbon fiber reinforced hot curing epoxy – a case study

Influence of Long-Term Moisture Exposure and Temperature on the Mechanical Properties of Hybrid FRP Composite Specimens

Dynamic Thermo-Mechanical Properties of Carbon Nanotube Resin Composite Films