Abstract:The world's highest-field dc magnets have, for more than fifty years, consisted of a combination of resistive and superconducting coils that we refer to as a "hybrid". These magnets use superconducting technology for the outer coils, where the magnetic field is moderate, and resistive-magnet technology for the inner coils, where the field is highest. In such a configuration, higher fields have been attained than was possible with purely superconducting magnet technology, and lower lifecycle costs are attained than with a purely resistive magnet. The peak field available has been 45 T for over 20 years in Tallahassee, Florida, USA. There is presently a "revolution" underway in hybrid magnet development. A second 45 T hybrid was completed in 2022 in Hefei, China that might be upgraded to 48 T in a few years. The high field lab in Grenoble, France is also testing a hybrid magnet intended to reach 43.5 T but which also might be upgraded to 46 T in a few years. In addition, the lab in Nijmegen, The Netherlands is presently assembling a hybrid magnet intended to operate at 46 T. Papers have been presented and published with conceptual designs of hybrid magnets with fields up to 60 T. Given the developments underway, this is an appropriate time to review the history of such systems, with a particular focus on the larger, more expensive part of the magnets: the superconducting outsert coils. The demands placed on the superconducting coils of these magnet systems are unique due to their coupling with resistive coils that are operated at very high stress and wear out regularly, resulting in large field transients and fault forces. The evolution of the technology used for the superconducting coils of these hybrid systems is presented, evolving from ventilated windings to cable-in-conduit to cryogen-free.

Fabrication Progress of the Outsert Coils of the Series-Connected Hybrid Magnets

Conceptual Design of an HTS Dipole Insert Based on Bi2212 Rutherford Cable

Fabrication of Nbti Superconducting Joint by Electromagnetic Forming Method

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Fabrication Procedures and Mechanical Supports of No-Insulation All-GdBCO Double Pancake Magnets in Liquid Helium

Development of persistent joints for superconducting Bi-2212 coils

Superconducting magnet technology for the outer coils of resistive-superconducting hybrid magnets

Development of YBCO Insert for a 25 T All Superconducting Magnet

Modeling of the Stacked High-Temperature Superconducting Cable-in-Conduit Conductor for High-Field Magnet Applications

Fabrication of Bi-2223 High Temperature Superconducting Magnet

Design and Performance of the First Dual-Coil Magnet at the Wuhan National High Magnetic Field Center

Development of Electromagnetic Forming Nbti Superconducting Joint

Solenoidal Coils Made from Monofilamentary and Multifilamentary MgB2 strands

Fabrication and Test of Nb3Sn-NbTi Superconducting Joint for a 14-T MRI Magnet

A Combined Testing and Modelling Methodology for the Mechanics of High-Field Superconducting Magnets

Design, Development and Fabrication for BESIII Superconducting Muon Detector Solenoid

Design and analysis of a HTS internally cooled cable for the Muon Collider target and capture solenoid magnets

Fabrication and Properties of Multifilamentary MgB2 Wires by In-Situ Powder-in-tube Process

What is Needed for BiSCO to Work in a Dipole Insert for 20 Tesla Hybrid Accelerator Magnets

Progress in the Construction of a 20 T REBCO Insert Coil for High-Field All-Superconducting Magnets

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source