Abstract:For the purpose of reducing weight of steel parts, save raw materials and keep or even improve safety standards, the development of advanced high strength steels is increasingly demanded in the automotive industry and engineering applications. We have proposed a novel heat treatment (quenching-partitioning-austempering treatment, Q-P-A) to obtain steel parts with high strength and good ductility. The Q-P-A process is intended to produce microstructure consisted of carbon-depleted martensite, carbon-enriched retained austenite and nanostructured bainite. Quenching(Q) treatment fabricates mixed microstructure of carbon-supersaturated martensite and certain amounts of untransformed austenite. Partitioning(P) thermal treatment accomplishes fully diffusing of carbon from the supersaturated martensite phase to the untransformed austenite phase and enriching the amount of carbon in untransformed austenite. Further low-temperature austempering(A) process induces incredible thin bainite from the carbon-enriched untransformed austenite. A study of the microstructure and mechanical properties of 50SiMnNiNb steel subjected to the novel Q-P-A treatment is presented. Microstructure is assessed by optical microscope(OM), field emission scanning electron microscope(FESEM) and transmission electron microscope(TEM), and the corresponding mechanical properties are measured. The experimental results indicate that attractive mechanical properties of steels during the Q-P-A process are attributed to the complex multi-phase structure. Slender plates of bainite with 20-40 nm thick are generated in the medium carbon steel. Meanwhile, with increasing of the volume fraction of nanostructured bainite, yield strength of steel parts is increased with little degradation of ultimate tensile strength. In this paper, a novel quenching-partitioning-austempering heat treatment is proposed, and the attractive mechanical properties of steels are obtained during the Q-P-A process.

Study on the Mechanical Behavior of Quenching and Partitioning Sheet Steel and Its Application to Stamping of a Hinge Pillar Inner Panel

Microstructure and Performance Evaluations on Q&P Hot Stamping Parts of Several UHSS Sheet Metals

Finite Element Simulation of Quenching and Partitioning Steel Sheets Forming

Ultrahigh strength-ductile medium-Mn steel auto-parts combining warm stamping and quenching & partitioning

A Newly-Designed Hot Stamping Plus Non-Isothermal Q&P Process to Improve Mechanical Properties of Commercial QP980 Steel

Research on One-Step Quenching and Partitioning Treatment and Its Application in Hot Stamping Process

Failure Investigation for QP Steel Sheets under uniaxial and Equal-Biaxial Tension Conditions

Study on quenching & partitioning heat treatment for hot-stamped high-strength steel B1500HS

Measurements of Bauschinger Effect and Transient Behavior of a Quenched and Partitioned Advanced High Strength Steel

Research on Hot Stamping-Carbon Partition-Intercritical Annealing Process of Medium Manganese Steel

Effect of hot stamping and quenching & partitioning process on microstructure and mechanical properties of ultra-high strength steel

A Tailored Preparation Method of Variable Strength for Ultra-High-Strength Steel Sheet and Mapping Mechanism between Process and Property

Study of Quenching and Partitioning (Q&P) and Ultrasonic Surface Rolling (USR) Process on Microstructure and Mechanical Property of a High-Strength Martensitic Steel

Effect of alloying and microstructure on formability of advanced high-strength steels processed via quenching and partitioning

Evolving asymmetric yield surfaces of quenching and partitioning steels: Characterization and modeling

Improve Bendability of a Cr-alloyed Press-Hardening Steel Through an In-Line Quenching and Non-Isothermal Partitioning Process

Effect of Intercritical Deformation on Microstructure and Mechanical Properties of Quenching and Partitioning Low Carbon Multiphase High-Strength Steel

Microstructure and Mechanical Properties of 50simnninb Steel by A Novel Quenching-Partitioning-Austempering Heat Treatment

Investigations on Edge Quality and Its Effect on Tensile Property and Fracture Patterns of QP980

Application of Quenching-Partitioning-Tempering Process in Hot Rolled Plate Fabrication