Abstract:In this paper, the start microstructure of full martensite and dual phases comprising ferrite and martensite were introduced into quenching and partitioning (Q&P) steel to tailor the microstructural characteristics and mechanical behaviors, which was achieved by means of a pre-quenching treatment with various temperatures. It is revealed that the conventional Q&P sample possessed bimodal microstructure with predominantly blocky feature, while gradually changed from combination of blocky and lath structures into individually lath feature in pre-quenched Q&P samples. The reversed austenite presented different variants, which predominantly reproduced the orientation of parent austenite and occasionally possessed twin relationship, low angle misorientation or extraneous with parent austenite. The twin-related austenite included annealing twin and reversed twin, whilst the latter showed twin relationship with both neighbored annealing twin and parent austenite. The variant type of reversed austenite significantly influenced the characteristics of its orientation relationship with neighbored pre-quenched martensite. The pre-quenching treatment was favorable to improve the carbon content of meta-stable austenite before Q&P treatment, while the final carbon content in retained austenite was mainly controlled by the synergistic carbon partitioning of martensite and bainite on basis of thermodynamic calculation, accompanied with the partitioning of Mn and Si elements. Moreover, the pre-quenched martensite deformed coordinately in a unit of martensite packet and was beneficial to retard necking to improve ductility. The optimal mechanical properties were obtained with pre-quenching temperature near Ac 3 , possessing yielding strength of 623 MPa, ultimate tensile strength of 861 MPa and product of strength and elongation exceeding 28 GPa%, attributing to the positive TRIP effect originating from lath-like retained austenite with high carbon content and multi-level hierarchical microstructure inherited from pre-quenched martensite.

Improving the ultimate tensile strength without loss of plasticity of quenching-partitioning steel by introducing hot deformation

Effect of Deformation on Microstructure and Mechanical Properties of Medium Carbon Steel During Heat Treatment Process

A novel microstructural design and heat treatment technique based on gradient control of carbon partitioning between austenite and martensite for high strength steels

Study of Quenching and Partitioning (Q&P) and Ultrasonic Surface Rolling (USR) Process on Microstructure and Mechanical Property of a High-Strength Martensitic Steel

Effect of hot stamping and quenching & partitioning process on microstructure and mechanical properties of ultra-high strength steel

Effect of alloying and microstructure on formability of advanced high-strength steels processed via quenching and partitioning

Ultrahigh strength-ductile medium-Mn steel auto-parts combining warm stamping and quenching & partitioning

Effect of tempering and partitioning (T&P) treatment on microstructure and mechanical properties of a low-carbon low-alloy quenched and dynamically partitioned (Q-DP) steel

Stepping-quenching-partitioning Treatment of 20simn2mova Steel and Effects of Carbon and Carbide Forming Elements

Enhancing the yield strength of intercritically annealed Q&P steel via bainite-based quenching and partitioning treatment

Insight into austenite reversion and mechanical behavior of quenching and partitioning steel inherited hierarchical structure of martensite

Mechanical Properties of Steels Treated by Q-P-T Process Incorporating Carbide-free-bainite/martenite Mutiphase Microstructure

Research on Hot Stamping-Carbon Partition-Intercritical Annealing Process of Medium Manganese Steel

Modelling of Q&P Steel Heat Treatment Process Based on Finite Element Method

Tailoring the Microstructure using Quenching and Partitioning Processing in a Commercial Mn-Si-Cr Spring Steel to Improve Tensile Properties

Room temperature quenching and partitioning (RT-Q&P) processed steel with chemically heterogeneous initial microstructure

A Carbide-Free Bainite/martensite/austenite Triplex Steel with Enhanced Mechanical Properties Treated by a Novel Quenching–partitioning–tempering Process

Quasi-Situ Characterization of Retained Austenite Orientation in Quenching and Partitioning Steel via Uniaxial Tensile Tests

Heterogeneous quenching and partitioning from manganese-partitioned pearlite: retained austenite modification and formability improvement

Cu Partitioning Behavior and Its Effect on Microstructure and Mechanical Properties of 0.12C-1.33Mn-0.55cu Q&P Steel