Experimental characterization and modeling of complex anisotropic hardening in quenching and partitioning (Q&P) steel subject to biaxial non-proportional loadings
Yong Hou,Myoung-Gyu Lee,Jianping Lin,Junying Min
DOI: https://doi.org/10.1016/j.ijplas.2022.103347
IF: 8.5
2022-09-01
International Journal of Plasticity
Abstract:Quenching and partitioning (Q&P) steels, as one of the third-generation advanced high strength steels, exhibit complex anisotropic hardening behavior under biaxial non-proportional loadings. In this study, a wide range of strain path changes (SPCs) defined as an angle (χ) between stress deviators before and after the SPC is experimentally applied to characterize the anisotropic hardening of a Q&P steel with a strength grade of 980 MPa (QP980). The investigated SPCs include uniaxial tension followed by compression (UT-UC; χ=180°), uniaxial compression followed by tension (UC-UT; χ=180°), uniaxial tension followed by plane strain (UT-PS; χ=30°), equi-biaxial tension followed by plane strain (EBT-PS; χ=30°), followed by uniaxial tension (EBT-UT; χ=60°) and followed by simple shear (EBT-SH; χ=90°). These SPCs are achieved by the program-controlled biaxial tensile testing equipment using novel arm-reinforced cruciforms. The experimental findings in the QP980 steel sheet are summarized as follows: (1) Strong strain-dependent Bauschinger effect, transient hardening and permanent softening are observed in both UT-UC and UC-UT loadings; (2) Bauschinger effect increases as strain increases, and it exhibits obvious tension-compression asymmetry; (3) The transient hardening behaviors are path-dependent under SPCs with various χ; (4) The Bauschinger coefficient is approximately a parabola function of cosχ; (5) The most significant strength softening occurs under EBT-SH loading. In order to describe the complex hardening behavior of the QP980 steel, a distortional hardening model is proposed on the basis of non-associated flow rule. A coupled quadratic and stress-invariant-based yield function is used to describe stress anisotropy, strength differential effect, and anisotropic hardening for proportional loadings. Then, the Bauschinger effect related hardening and path-dependent permanent softening are captured by a modified homogeneous anisotropic hardening model. The calibrated model parameters and experimental validations demonstrate that the strain- and path-dependent Bauschinger effect can be well predicted by the proposed constitutive model. Especially, the model enables to accurately describe both the asymmetric anisotropic hardening and yield surface distortions of the QP980 steel at various biaxial SPCs.
materials science, multidisciplinary,engineering, mechanical,mechanics