Abstract:In this paper, the start microstructure of full martensite and dual phases comprising ferrite and martensite were introduced into quenching and partitioning (Q&P) steel to tailor the microstructural characteristics and mechanical behaviors, which was achieved by means of a pre-quenching treatment with various temperatures. It is revealed that the conventional Q&P sample possessed bimodal microstructure with predominantly blocky feature, while gradually changed from combination of blocky and lath structures into individually lath feature in pre-quenched Q&P samples. The reversed austenite presented different variants, which predominantly reproduced the orientation of parent austenite and occasionally possessed twin relationship, low angle misorientation or extraneous with parent austenite. The twin-related austenite included annealing twin and reversed twin, whilst the latter showed twin relationship with both neighbored annealing twin and parent austenite. The variant type of reversed austenite significantly influenced the characteristics of its orientation relationship with neighbored pre-quenched martensite. The pre-quenching treatment was favorable to improve the carbon content of meta-stable austenite before Q&P treatment, while the final carbon content in retained austenite was mainly controlled by the synergistic carbon partitioning of martensite and bainite on basis of thermodynamic calculation, accompanied with the partitioning of Mn and Si elements. Moreover, the pre-quenched martensite deformed coordinately in a unit of martensite packet and was beneficial to retard necking to improve ductility. The optimal mechanical properties were obtained with pre-quenching temperature near Ac 3 , possessing yielding strength of 623 MPa, ultimate tensile strength of 861 MPa and product of strength and elongation exceeding 28 GPa%, attributing to the positive TRIP effect originating from lath-like retained austenite with high carbon content and multi-level hierarchical microstructure inherited from pre-quenched martensite.

Quenching and Partitioning (Q&P) Steel: Alloy Design, Phase Transformation and Evolution of Microstructure

Microstructure-property relationship in the quenching and partitioning (Q&P) steel

Evolution of microstructure during the "quenching and partitioning (Q&P)" treatment

Microstructural Evolution of a Low-Carbon Steel during Application of Quenching and Partitioning Heat Treatments after Partial Austenitization

Insight into austenite reversion and mechanical behavior of quenching and partitioning steel inherited hierarchical structure of martensite

Modelling of Q&P Steel Heat Treatment Process Based on Finite Element Method

Optimized Properties of a Quenching and Partitioning Steel by Quenching at Fine Martensite Start Temperature

Q&P Response of a Medium Carbon Low Alloy Steel

A novel microstructural design and heat treatment technique based on gradient control of carbon partitioning between austenite and martensite for high strength steels

Influence of Quenching and Partitioning Times on Austenite Stability and Tensile Properties of CMnAlSi Quenching and Partitioning Steel

Influence of Isothermal Treatment Prior to Initial Quenching of Q&P Process on Microstructure and Mechanical Properties of Medium Mn Steel

Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: A critical assessment

Strength-Toughness of a Low-Alloy 0.25C Steel Treated by Q&P Processing

An optimum retained austenite design from bainitic matrix for a novel Q&P steel

Impact of Partitioning Temperature Parameters during the Quenching and Partitioning Process on Medium Carbon Steels with Two Different Alloying Strategies

Effect of alloying and microstructure on formability of advanced high-strength steels processed via quenching and partitioning

Design of tough, ductile direct quenched and partitioned advanced high-strength steel with tailored silicon content

Modified Methodology for the Quench Temperature Selection in Quenching and Partitioning (Q&P) Processing of Steels

Effects of Isothermal Transformation at the Quenching Temperature on the Microstructure and Mechanical Properties of a Medium-Carbon Steel

Tailoring the Microstructure using Quenching and Partitioning Processing in a Commercial Mn-Si-Cr Spring Steel to Improve Tensile Properties