Abstract:Boron is an essential solute element for improving the grain boundary strength in several high temperature metallic alloys especially in Ni- and Co-base superalloys although the detailed strengthening mechanisms are still not well understood. In superalloys, boron leads to the formation of borides and precipitate depleted zones around the grain boundaries and alters the bond strength among the grains directly. In this paper, we explore in detail the role of the boron content in ternary γ/γ′ Co-9Al-9W alloys. Local as well as bulk mechanical properties were evaluated using nanoindentation and compression testing and correlated to near-atomic scale microstructure and compositions obtained from electron microscopy and atom probe tomography. The alloy variant with low B content (0.005 at.% B) reveals an increase in yield strength at room temperature and 600 °C and atom probe tomography investigations show that solute B segregates to the grain boundaries. However, in the bulk B exclusively partitions to the γ′ phase. Additionally, the γ′/γ′ grain boundaries are depleted in W and Al with the concentration locally shifted towards the γ composition forming a very thin γ layer at the γ′/γ′ grain boundaries, which supports dislocation mobility in the γ′/γ′ grain boundary region during deformation. Higher content of B (0.04 at.% B) promotes formation of W-rich borides at the grain boundaries that leads to undesirable precipitate depleted zones adjacent to these borides that decrease the strength of the alloy drastically. However, it was also found that a subsequent annealing heat treatment eliminates these detrimental zones by re-precipitating γ′ and thus elevating the strength of the alloy. This result shows that, if a precipitate depleted zone can be avoided, B significantly improves the mechanical properties of polycrystalline Co-base superalloys by strengthening the γ′ phase and by improving grain boundary cohesion.

Boride Zone Formation in Transient Liquid Phase Bonding of Pairings of Parent Superalloy Materials with Different Compositions and Grain Structures

Borides of Preferred Orientation Formed in the Transient Liquid Phase Joint of Γ′-Strengthened Co-base Single Crystal Superalloy

On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys

Transient Liquid Phase Bonding of IC10 Single Crystal with GH3039 Superalloy Using BNi2 Interlayer: Microstructure and Mechanical Properties

The Effects of Borides on the Mechanical Properties of Tlpb Repaired Inconel 738 Superalloy

Boride Evolutionary Behavior and Mechanism in the TLP Repaired IN738 Superalloy with Crack-Like Defects

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

On the effect of boron on grain boundary character in a new polycrystalline superalloy

Experimental and Numerical Study of Transient Liquid Phase Diffusion Bonded DZ40M Superalloys

Precipitation and Evolution of Grain Boundary Boride in A Nickel-Based Superalloy During Thermal Exposure

M5B3 Boride at the Grain Boundary of a Nickel-based Superalloy

Transient Liquid Phase Diffusion Bonding of Ni3Al Superalloy with Low-Boron Nickel-Base Powder Interlayer

Transient Liquid Phase Bonding of ZGH451 Superalloy Fabricated by Directed Energy Deposition

Microstructural evolution in laser melted boron alloyed Ti-6Al-4V

Phase Formation during Heating of Amorphous Nickel-Based BNi-3 for Joining of Dissimilar Cobalt-Based Superalloys

Diffusion bonding of steels with a homogeneous microstructure throughout the joint

Effects of Boron and Silicon on Microstructural Evolution and Mechanical Properties of Transient Liquid Phase Bonded GH3039/IC10 Joints

Interaction of carbon, boron and sulphur in superalloys

The Determination of Degree of Order of Nearby Grain Boundary in the Ni3A1 Family

Study About the Forming Mechanism of Boron in Al-1B Alloy

Effect of Carbon and Boron Additions on Segregation Behavior of Directionally Solidified Nickel-Base Superalloys with Rhenium