Abstract:The original Johnson-Cook model's poor prediction of W90 alloy stress at high strain rate and high and low temperatures restricts research and utilization of this alloy. This study used a Split Hopkinson Pressure Bar (SHPB) device to conduct dynamic compression tests on W90 alloy over a temperature range of [-90°C,700°C] and analyze its mechanical behavior. We examined the material's different plastic phase characteristics at high and low temperatures and conducted microstructure research on impact test specimens. Then, we analyzed the stress-strain data from SHPB experiments and quasi-static compression tests on the classical Johnson-Cook model. The original Johnson-Cook model was calibrated using the stress-strain data from SHPB and quasi-static compression tests, and the modified Johnson-Cook model was established and verified. The results show that: low temperature significantly strengthens the material's stress, while increasing temperature thermal softening reduces stress; increasing strain rate increases the strain generated by the workpiece, causing faster strain hardening and thermal softening effects, resulting in higher and more stable stress; low temperature makes thicker grain boundaries, increasing plastic stress, and increasing strain rate also increases plastic stress, as well as making the material's grain boundaries thicker. The increase of strain rate makes the grain more dense, which will also show up in the increase of stress on the macroscopic level; the modified Johnson-Cook model in this paper has high agreement with experimental data, with a mean value of MAPE of only 1.85 %,which is 90.20 % lower than the traditional model, and the average value of the RMSE is 85.56 % lower than the traditional model. The modified model significantly outperforms the traditional model in predicting stress and better describes stress changes in W90 at different temperatures.

Correction of strain rate parameters of Johnson-Cook constitutive model for Ti-based metallic glass composites

Modification of strain rate strengthening coefficient for Johnson-Cook constitutive model of Ti6Al4V alloy

0610 A Comparative Study on Gao-Zhang and Johnson-Cook Constitutive Models

Research on Johnson–Cook Constitutive Model of γ-TiAl Alloy with Improved Parameters

Parametric Analysis and Improvement of the Johnson-Cook Model for a TC4 Titanium Alloy

Modification of the Johnson-Cook relationship for AZ31 magnesium alloy at high strain rates

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Thermo⁻Mechanical Behavior and Constitutive Modeling of In Situ TiB2/7050 Al Metal Matrix Composites Over Wide Temperature and Strain Rate Ranges

A modified Johnson-Cook model considering strain softening of A356 alloy

Mechanical properties and JC constitutive modification of tungsten alloys under high strain rates and high/low temperatures

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Constitutive model for high temperature deformation behavior of Ti–Zr–Ni–Be bulk metallic glass in supercooled liquid region

Dynamic Mechanical Behavior and Modified Johnson-Cook Model of Ti60 Alloy under High-temperature and High-strain-rate Conditions

Study on constitutive relationship of 6061 aluminum alloy based on Johnson-Cook model

Thermomechanical Response of Commercially Pure Titanium under Large Plastic Deformation at High Strain Rates

Dynamic Mechanical Properties and Modified Material Constitutive Model for Hot Forged Ti2AlNb over Wide Ranges of Temperature and Strain Rate

Dynamic mechanical performance and constitutive model for Zr58Cu12Ni12Al15Nb3 metallic glass

Modified Johnson-Cook Constitutive Model for Dynamic Compressive Behaviors of C250 Maraging Steel at Different Temperatures

Stress-Strain Curves and Modified Material Constitutive Model for Ti-6Al-4V over the Wide Ranges of Strain Rate and Temperature

The rheological behavior and constitutive model of Zr35Ti30Be27·5Cu7.5 metallic glass under high strain rate tensile conditions within the supercooled liquid region

A new constitutive model for HCP metals