Abstract:Tensile rheological behavior of the Zr35Ti30Be27·5Cu7.5 metallic glass under conditions of high strain rates (strain rates ranging from 0.05 s−1 to 0.5 s−1) within the supercooled liquid region was studied. The stress-strain curve reveals that this metallic glass demonstrates non-Newtonian flow characteristics under these circumstances. The peak stress associated with stress overshoot increases as temperature decreases and strain rate increases. However, the steady-state flow stress displays an anomalous decrease due to rapid necking at high strain rates. Subsequently, the thermal processing map of the Zr35Ti30Be27·5Cu7.5 metallic glass was established and analyzed. It reveals that the alloy has relatively excellent thermoplastic forming ability at temperature between 630 K and 655 K and strain rates between 0.05 s−1-0.2 s−1. We found that under strain rates ε ˙ ≥ 10 − 2 s − 1 , the strain rate is the primary factor influencing normalized viscosity. Therefore, we developed a simplified Maxwell-Pulse constitutive model applicable to metallic glass in the supercooled liquid region under high strain rate conditions, by simplifying the constitutive equation for steady-state flow stress using a simplified formula for normalized viscosity calculation. The predictions of this simplified modified model align well with experimental values. By comparing the simplified and unsimplified Maxwell-Pulse constitutive models, the overall fitting accuracy of the simplified model was improved by 3–5%, with the highest improvement of 67% in the steady-state flow stress stage. These results indicate that the modified model accurately reflects the stress-strain relationship for the Zr35Ti30Be27·5Cu7.5 metallic glass under high temperature and high strain rate tensile conditions.

Constitutive model for high temperature deformation behavior of Ti–Zr–Ni–Be bulk metallic glass in supercooled liquid region

Finite-element analysis for high-temperature deformation of bulk metallic glasses in a supercooled liquid region based on the free volume constitutive model

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

A Finite-Deformation Constitutive Model of Bulk Metallic Glass Plasticity

The rheological behavior and constitutive model of Zr35Ti30Be27·5Cu7.5 metallic glass under high strain rate tensile conditions within the supercooled liquid region

A Maxwell-extreme constitutive model of Zr-based bulk metallic glass in supercooled liquid region

A size-dependent constitutive model of bulk metallic glasses in the supercooled liquid region

Constitutive description of Bulk Metallic Glass composites at high homologous temperatures

Dynamic mechanical performance and constitutive model for Zr58Cu12Ni12Al15Nb3 metallic glass

A finite-deformation constitutive model for bulk metallic glass composites

Change in free volume during the homogeneous flow of Zr-based bulk metallic glass matrix composite

The multi-axial deformation behavior of bulk metallic glasses at high homologous temperatures

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

A Size-Dependent Free Volume Prediction Model of Zr55Cu30Al10Ni5 Bulk Metallic Glass in the Supercooled Liquid Region

A failure mechanism based constitutive model for bulk metallic glass

A constitutive model for metallic glasses based on two-temperature nonequilibrium thermodynamics

Constitutive model for inhomogeneous flow in bulk metallic glasses

High temperature deformation behaviors of a CuZr-based bulk metallic glass composite

A meso-mechanical constitutive model of bulk metallic glass composites considering the local failure of matrix