Abstract:For an accurate estimation of the fatigue performance of welded joints, not only the initial residual stress field but also its variation under load is decisive. The portion of residual stress which stays stable can shift the load stress range much the same way as the mean stresses do in fatigue loading. The relaxation of residual stresses during fatigue loading however reduces this hazard to the structural health. That is, before considering the influence of residual stresses in fatigue, the effect of fatigue on residual stresses should be understood. In this work, the influence of the quasi-static and cyclic loading on the relaxation of welding residual stresses in small specimens and large components out of different steels namely S235JRG2, S355J2G3, P460NL, S690QL, S960QL, and S1100QL has been investigated experimentally. X-ray diffraction analysis as a reliable method has been used for the determination of residual stress profiles in surface layers. For residual stress analysis in deeper layers, synchrotron and neutron diffraction techniques were applied as complementary methods. A clear recognition of the difference between initial welding residual stresses in small- and large-scale specimens was observed. Tensile residual stresses as high as the yield strength could appear in large-scale welded specimens. That was not the case for small-scale welds due to the low grade of restraint. Nevertheless, in both types of samples, the highest residual stresses were obtained in the weld centerline. At the weld toe which is critical regarding fatigue crack initiation, the magnitude of the residual stresses is lower. Beside of that, it was observed that in the case of relaxation, the first load cycles especially in components out of low-strength steels are decisive. The influence of loading conditions and local mechanical properties on the relaxation of welding residual stresses was investigated based on principles of solid mechanics. The von Mises failure criterion was able to describe the relaxation behavior.

The Residual Stress Relaxation Behavior of Weldments During Cyclic Loading

Estimation of Residual Stresses by Nanoindentation in an Experimental High Strength Microalloyed Steel Subjected to Rapid Thermal Cycles

On the Mechanism of Residual Stresses Relaxation in Welded Joints under Cyclic Loading

A Model to Predict the Relaxation of Weld Residual Stress by Cyclic Load: Experimental and Finite Element Modeling

Welding residual stress behavior under mechanical loading

Assessing the Residual Stresses in Dissimilar Welded Joint: Depth-Sensing Indentation Testing and Numerical Simulation

Experimental and Numerical Characterization of Low Cycle Fatigue and Creep Fatigue Behaviour of P92 Steel Welded Joint

Cumulative damage model for steel weld under low-cycle fatigue

Residual Stress Relaxation in the Laser Welded Structure after Low-Cycle Fatigue and Fatigue Life: Numerical Analysis and Neutron Diffraction Experiment

Evolution of welding residual stresses during cyclic tests in welded tubular joints

Relaxation Effect of Welding Residual Stress in Deck-to-rib Joints

Damage Cumulation Analysis of Welded Joints under Low Cycle Loadings

Fatigue life prediction of 316L stainless steel weld joint including the role of residual stress and its evolution: Experimental and modelling

Compressive residual stress relaxation in hardened steel during cyclic and static load

Residual stress relaxation in HFMI-treated fillet welds after single overload peaks

Residual stresses with time-independent cyclic plasticity in finite element analysis of welded joints

Effect of Cyclic Loading on the Relaxation of Residual Stress in the Butt-Weld Joints of Nuclear Reactor Piping

Investigation on the Residual Stress Redistribution under Cyclic Loading

High Cycle Fatigue Assessment of Steel Load-Carrying Cruciform Welded Joints: an Overview of Recent Results

Effects of welding residual stresses on fatigue reliability assessment of a PC beam bridge with corrugated steel webs under dynamic vehicle loading

Effect of Cyclic Loadings on Stress Relaxation Behaviors of 9–12%cr Steel at High Temperature