Abstract:For an accurate estimation of the fatigue performance of welded joints, not only the initial residual stress field but also its variation under load is decisive. The portion of residual stress which stays stable can shift the load stress range much the same way as the mean stresses do in fatigue loading. The relaxation of residual stresses during fatigue loading however reduces this hazard to the structural health. That is, before considering the influence of residual stresses in fatigue, the effect of fatigue on residual stresses should be understood. In this work, the influence of the quasi-static and cyclic loading on the relaxation of welding residual stresses in small specimens and large components out of different steels namely S235JRG2, S355J2G3, P460NL, S690QL, S960QL, and S1100QL has been investigated experimentally. X-ray diffraction analysis as a reliable method has been used for the determination of residual stress profiles in surface layers. For residual stress analysis in deeper layers, synchrotron and neutron diffraction techniques were applied as complementary methods. A clear recognition of the difference between initial welding residual stresses in small- and large-scale specimens was observed. Tensile residual stresses as high as the yield strength could appear in large-scale welded specimens. That was not the case for small-scale welds due to the low grade of restraint. Nevertheless, in both types of samples, the highest residual stresses were obtained in the weld centerline. At the weld toe which is critical regarding fatigue crack initiation, the magnitude of the residual stresses is lower. Beside of that, it was observed that in the case of relaxation, the first load cycles especially in components out of low-strength steels are decisive. The influence of loading conditions and local mechanical properties on the relaxation of welding residual stresses was investigated based on principles of solid mechanics. The von Mises failure criterion was able to describe the relaxation behavior.

Residual Stress Relaxation in the Laser Welded Structure after Low-Cycle Fatigue and Fatigue Life: Numerical Analysis and Neutron Diffraction Experiment

Low Cycle Fatigue Properties and Fracture Mechanism of Q345qC Steel and Its Welded Joint

Numerical Analysis of Low-Cycle Fatigue Using the Direct Cyclic Method Considering Laser Welding Residual Stress

A Model to Predict the Relaxation of Weld Residual Stress by Cyclic Load: Experimental and Finite Element Modeling

Fatigue life prediction of 316L stainless steel weld joint including the role of residual stress and its evolution: Experimental and modelling

Welding residual stress behavior under mechanical loading

The Residual Stress Relaxation Behavior of Weldments During Cyclic Loading

Experimental and Numerical Characterization of Low Cycle Fatigue and Creep Fatigue Behaviour of P92 Steel Welded Joint

Low cycle fatigue analysis of welded joints considering material cycling behavior

On the Mechanism of Residual Stresses Relaxation in Welded Joints under Cyclic Loading

Numerical Analysis of High and Low‐cycle Flexural Fatigue for Reinforced Concrete Beams under Full‐range of Varying Amplitudes

A post‐processing procedure for predicting high‐ and low‐cycle fatigue life of welded structures based on the master E–N curve

A Fatigue Life Prediction Approach for Resistance Spot Welded Joints with Consideration of the Stress Ratio Effect

Fatigue Life Assessment Of Welded Structures By Effective Notch Stress Approach

Uncertainty Quantification of Fatigue Life Prediction in Welded Structures Using Microstructure-Based Simulations

Numerical simulation of residual stress and deformation on laser welding of "grooved-coat" structure

Numerical and experimental study of residual stress in multi-pass laser welded 5A06 alloy ultra-thick plate

The Structural Strain Method for Fatigue Evaluation of Welded Components: Analytical Treatment of Reversed Plasticity

Measurement and Simulation of Residual Stresses in Laser Welded CFRP/steel Lap Joints

Re-Distribution of Welding Residual Stress in Fatigue Crack Propagation Considering Elastic–Plastic Behavior

Experimental and numerical investigations on extremely-low-cycle fatigue fracture behavior of steel welded joints