Abstract:Earthquake-induced fractures in steel structures are characterised by high-strain low-cycle conditions. In order to investigate the ultra-low cyclic fatigue fracture of steel welded joints under earthquakes, two most commonly used structural steels (Q235B and Q345B) and the corresponding welds were studied by experiments and numerical analysis in this paper. Specimens were extracted from the base material, the weld metal and the heat affected zone to investigate the behaviour in different parts of the welded joint. Eighteen smooth round bars were tested under large strain amplitudes, the hysteretic properties, damage degradation characteristics and failure process were analyzed. Constitutive model named Chaboche model was calibrated to describe the cyclic hardening behaviour of these materials. Seventy-two notched round bars with three different notch sizes and two loading protocols were tested to study the fracture behaviour of different materials at different stress triaxialities and different strain amplitudes. Two micromechanical fracture models: cyclic void growth model and degraded significant plastic strain model were calibrated based on the test results. The micromechanical models and Chaboche model were incorporated into numerical simulations by software ABAQUS with subroutine VUMAT to predict the materials fracture. The results show that the failure process under cyclic loads is opposite to that of monotone loads. The dissipation capacity of Q345B is superior to that of Q235B. The fracture resistance deteriorate more in the weld zone under the same loading conditions. The validated models can be used to effectively and accurately evaluate the fracture in steel welded connections under ULCF conditions.

Experimental and numerical investigations on extremely-low-cycle fatigue fracture behavior of steel welded joints

Low Cycle Fatigue Properties and Fracture Mechanism of Q345qC Steel and Its Welded Joint

Prediction of the Ultra-Low-Cycle Fatigue Damage of Q345qC Steel and Its Weld Joint

Study on Ultra‐low Cycle Fatigue Fracture of Thick‐walled Steel Bridge Piers

Ultra-low Cycle Fatigue Fracture Initiation Life Evaluation of Thick-Walled Steel Bridge Piers with Microscopic Damage Index under Bidirectional Cyclic Loading

Low-Cycle Fatigue Test of Circular Concrete Filled Tubular Columns

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Low-cycle fatigue test of CFT and CCFT columns

Experimental study on low-cycle fatigue fracture behavior of high strength steel beam-to-column connection

Investigation on the Weld Damage Behavior of Steel Beam-to-column Connection

Ultra-Low Cyclic Fatigue Fracture of Q235B and Q345B Steels and Their Butt Welded Joints

Extremely low cycle fatigue prediction of steel beam-to-column connection by using a micro-mechanics based fracture model

Damage Behavior of Steel Beam-to-column Connections under Inelastic Cyclic Loading

Fracture Behavior Analyses of Welded Beam-to-column Connections Based on Elastic and Inelastic Fracture Mechanics

Fracture prediction of circular steel tubular X-joints using a Lode parameter enhanced cyclic void growth model

Experimental and numerical investigation on Q690 high strength steel beam-columns under cyclic lateral loading about weak axis

Seismic Low-Cycle Fatigue Evaluation of Welded Beam-to-column Connections in Steel Moment Frames Through Global–local Analysis

ANALYSIS ON DAMAGE AND FAILURE BEHAVIOR OF STEEL FRAME WELDED CONNECTIONS

Continuous damage model for structural steels and weld metals under ultra-low-cyclic loading

Experimental and Numerical Investigation of Ductile Fracture of Carbon Steel Structural Components

Biaxial Very High Cycle Fatigue Testing and Failure Mechanism of Welded Joints in Structural Steel Q345