Abstract:An experimental study was conducted to investigate the effects of loading cycles on seismic behaviors and damage properties of flexure–shear critical reinforced concrete columns. Two sets of circular columns (including eight specimens) with different shear span ratios were tested under quasi-static loads with various numbers of loading cycles, namely 0 (i.e., monotonic loading), 3, 10, and 20 cycles. The failure modes, load-deformation curves, ductility, and energy dissipation capacities of the flexure–shear critical columns with various loading cycles were explored. The test results revealed that the flexure–shear failures of columns were more likely to occur with an increase in loading cycles, as evidenced by intensified shear effects and cumulative damage effects induced by cyclic loading. The study examined that the ultimate deformation was the most crucial factor that affects the damage properties of the flexure–shear critical columns. The ultimate displacements diminished with the loading cycles increasing and reduced by 38%, 50%, and 62% when the loading cycles increased from 0 to 3, 10, and 20 cycles, respectively. Additionally, the damage properties of the flexure–shear critical columns were also pertinent to cumulative energy dissipation. The cumulative energy dissipation of the column specimens significantly increased after yielding and rose in proportion to the loading cycles. Two analytical models were proposed for the evaluation of equivalent viscous damping and seismic damage index in flexure–shear columns, which considered the effects of the number of loading cycles. These models could better provide an optimal analysis of the energy dissipation capacities and damage properties for flexure–shear critical columns subjected to seismic excitations, respectively.

Low-cycle fatigue test of CFT and CCFT columns

Low-Cycle Fatigue Test of Circular Concrete Filled Tubular Columns

Low-Cycle Fatigue Damage of Circular Concrete-Filled-Tube Columns

Low Cyclic Fatigue Performance of Concrete-Filled Steel Tube Columns

Seismic Behavior of Confined Square CFT Columns

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

A comparison of the impact behavior of RC and CFT circular columns under lateral impact loading *

EXPERIMENTAL STUDIES ON HYSTERIC BEHAVIOR OF SQUARE CCFT COLUMN

Behaviour of CFT and CCFT columns under impact loads

Experimental research on seismic performance of confined concrete filled tubular columns under cyclic loading

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Impact Behaviors of CFT and CFRP Confined CFT Stub Columns

Triaxial Hybrid Simulation and Cyclic Tests of Full-Scale Circular Steel Tube Columns

Post-Earthquake Fire Resistance of Circular Concrete-Filled Steel Tubular Columns

Numerical Studies on Full-Scale Steel Columns under Complex Seismic Loading

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Numerical Analysis of High and Low‐cycle Flexural Fatigue for Reinforced Concrete Beams under Full‐range of Varying Amplitudes

Test on Torsion Behavior of CFST Columns Subjected to Complex Load

Local Damage Identification of High-Strength Circular Concrete-Filled Steel Tubes under Low Cycle Fatigue

Seismic performance and damage properties of flexure–shear critical RC columns with various loading cycles

Extremely low cycle fatigue prediction of steel beam-to-column connection by using a micro-mechanics based fracture model