Abstract:In recent times, auxetic woven structures gained considerable attention from the researchers due to their excellent impact properties in high-performance areas. Researchers have done much work on the auxetic behavior of the natural and low-performance yarns in two-dimensional structures. Keeping in view the structural application of auxetic structures, in this work, three-dimensional (3D) woven auxetic fabrics were developed on conventional weaving machines with high-performance yarns. Effect of high-performance yarns (Para-aramid and UHMWPE) as the main structure and binding threads on the auxeticity of 3D fabric structures and the impact properties of their corresponding composites were discussed. For this purpose, eight different orthogonal 3D woven structures were produced with para-aramid filament yarn as warp and weft, whereas ultra-high molecular weight polyethylene (UHMWPE) filament yarn was used as a binder. The tensile load was applied to the 3D fabrics to check their auxeticity, and a change in thickness was recorded. The results showed that as the float length of binder yarn and warp yarn increases with the equal and same ratio, the auxeticity also increases. While auxeticity decreases as the difference between the float length of binder yarn and warp yarn increases. The Negative Poisson's Ratio (NPR) of 3D woven fabrics ranged from −0.9 to −2.98. In the second step, these 3D woven fabrics were fabricated into their composites using unsaturated polyester resin, and the hand-layup technique. Their impact strength was measured using the Charpy test method. Auxetic woven composites made of high-performance yarns structures showed impact strength ranging from 55.64 kJ/m2 to 158.46 kJ/m2. High-performance yarns (Para-aramid and Ultra-high molecular weight polyethylene) were used to create eight 3D woven and composite samples with enhanced auxetic behavior.The result shows that samples having maximum binding yarn float length and fewer intersection points show maximum auxeticity and increased energy absorption.The maximum auxeticity and impact energy absorption obtained was -2.98 and 158.46 kJ/m2, respectively.The current research has applications in protective textiles and bulletproof composite panels.

Development of UV protective sheath for high performance fibers for high altitude applications

Unparalleled Armour for Aramid Fiber with Excellent UV Resistance in Extreme Environment

Evaluation of the UV Protection Properties of Para-Aramid Woven Fabrics with Various Specialty Core Yarns

Surface functionalization of aramid fibers via constructing different zinc oxide nanostructures for improved UV resistance

Polymeric Fibers with High Strength and High Toughness at Extreme Temperatures

Development of Highly Ultraviolet-Protective Polypropylene/TiO2 Nonwoven Fiber

A Comprehensive Review of Ultrahigh Molecular Weight Polyethylene Fibers for Applications Based on Their Different Preparation Techniques

Development of 3D auxetic structures using para-aramid and ultra-high molecular weight polyethylene yarns

Yarn on yarn abrasion performance of high modulus polyethylene fiber improved by graphene/polyurethane composites coating

Yarn on yarn abrasion failure mechanism of ultrahigh molecular weight polyethylene fiber

Fabrication and characterization of TiO2 and MWCNT coated electrospinning nanofibers for UV protection properties

Thermal aging behavior and heat resistance mechanism of ultraviolet crosslinked ultra‐high molecular weight polyethylene fiber

Ultraviolet cross‐linked ultra‐high molecular weight polyethylene fiber laminate: Preparation and mechanism analysis for its excellent mechanical properties

Activated Carbon Fibers/Zinc Oxide Nanorods Fabrics for UV Protection

Preparation and Characterization of Electrospun Mat of Ultra-high Molecular Weight Polyethylene/High-Density Polyethylene Blends

Facile fabrication of luminescent ultra‐high molecular weight polyethylene fibers based on novel alkyl‐substituted 1,8‐naphthalimide fluorescent dyes

Facile preparation of ultraviolet resistant “hard armors” on poly(p-phenylene benzobisoxazole) fibers through heat-induced surface treatment

Robust and Flame‐Retardant Zylon Aerogel Fibers for Wearable Thermal Insulation and Sensing in Harsh Environment

Hydrothermal aging behavior of high‐performance polymeric fibers: Mechanical performance at the yarn scale and chemical analysis

Study of the Mechanical Properties of Ultra-High Molecular Weight Polyethylene Fiber Rope

Structure induced effectiveness of shear thickening fluid for modulating impact resistance of UHMWPE fabrics