Abstract:A series of FeMnTiOx mixed oxides catalysts, which were synthesized by a CTAB-assisted co-precipitation process and calcined at different temperatures, were investigated for selective catalytic reduction of NO with NH3 in the presence of excess O-2. The samples were characterized by means of N-2-physisorption, XRD, TEM, H-2-TPR, XPS, NH3-TPD, and in situ DRIFTS technologies. The results indicated that the activities of samples were not predominately determined by BET specific surface area. Compared with amorphous TiO2, the anatase TiO2 crystalline phase was more conducive to enhance the electron interaction between manganese species and support: Mn4+ + Ti3+ <-> Mn3+ + Ti4+center dot NH3 was easier to be activated on the surface of samples which had lower binding energy of lattice oxygen in selective catalytic reduction of NO with NH3. The addition of CAB not only promoted the formation of anatase TiO2 crystalline phase and Lewis acid sites, but also improved the dispersion extent of active phase on the surface of samples. Thus, it enhanced the catalytic performance of samples. In addition, calcination temperature had an important influence on the valence state of manganese species, as well as the dispersion extent of active phase and the crystal phase structure of support. The sample calcined at 4000 degrees C showed excellent low-temperature activity and mid-temperature N-2 selectivity. The NO conversion and N-2 selectivity of this sample were above 90% in the range of 150-350 degrees C at a space velocity of 30,000 mL g(-1) h(-1). Furthermore, it exhibited sulfur tolerance and water resistance to a certain extent. (C) 2015 Elsevier B.V. All rights reserved.

Fe-MCM-41 from Coal-Series Kaolin as Catalysts for the Selective Catalytic Reduction of NO with Ammonia

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

Highly dispersed MnOx-FeO(x)supported by silicalite-1 for the selective catalytic reduction of NO(x)with NH(3)at low temperatures

Synthesis, Characterization and Catalytic Performance of Femntiox Mixed Oxides Catalyst Prepared by A Ctab-Assisted Process for Mid-Low Temperature Nh3-Scr

Fe-Mn/Al2O3 Catalysts for Low Temperature Selective Catalytic Reduction of NO with NH3

Catalytic Performance of Fe–ZSM-5 Catalysts for Selective Catalytic Reduction of Nitric Oxide by Ammonia

Selective Catalytic Reduction of NO with NH3 over Mn–Fe/USY under Lean Burn Conditions

A New Type Ni-MOF Catalyst with High Stability for Selective Catalytic Reduction of NOx with NH3

Capability of molecular sieve-supported FeSO_4 catalyst for selective catalytic reduction of NO_x

Spinel Structured CoaMnbOx Mixed Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

Metal-organic framework assisted preparation of α-Fe2O3 for selective catalytic reduction of NOX with NH3

Low-Temperature Selective Catalytic Reduction of NOx with NH3 over Fe–Mn Mixed-Oxide Catalysts Containing Fe3Mn3O8 Phase

Highly dispersed MnO<sub>x</sub>–FeO<sub>x</sub> supported by silicalite-1 for the selective catalytic reduction of NO<sub>x</sub> with NH<sub>3</sub> at low temperatures

Efficient FeMn/Al2O3 catalyst for NH3-SCR of NO at low temperature: the Influence of Strong Interactions Between Active Components and Carrier

Insights over Titanium Modified FeMgOx Catalysts for Selective Catalytic Reduction of NOx with NH3: Influence of Precursors and Crystalline Structures

Selective Catalytic Reduction of NOxwith Ammonia over Fe-Mo/ZSM-5 Catalysts

Low-temperature SCR of NO with NH3 over AC/C Supported Manganese-Based Monolithic Catalysts

Catalytic Performance of One-Pot Synthesized Fe-MWW Layered Zeolites (MCM-22, MCM-36, and ITQ-2) in Selective Catalytic Reduction of Nitrogen Oxides with Ammonia

Synthesis of Both Powdered and Preformed MnOx–CeO2–Al2O3 Catalysts by Self-Propagating High-Temperature Synthesis for the Selective Catalytic Reduction of NOx with NH3

Bimetallic Cerium–copper Nanoparticles Embedded in Ordered Mesoporous Carbons As Effective Catalysts for the Selective Catalytic Reduction of NO with NH3