Abstract:Due to the advantageous characteristics of laser welding technology, it is being increasingly used for constructing stainless steel rail vehicles. It can improve the appearance of a vehicle, enable designs with a relatively high degree of flatness, and ensure higher-quality connections between different parts of a vehicle. Moreover, it can improve the strength and stiffness of the components of the vehicle. In this study, a large-scale assembly module of a stainless steel side-wall was considered as the research object. The combined heat source model of a Gaussian heat source and a cylindrical volume heat source was used to obtain the heat source parameters of laser welding to match the experimental data. Based on the thermal cycle curve method (TCCM), the influence of the number of weld segments and mesh divisions of the local model on the efficiency and accuracy of laser welding simulations was investigated. Thereafter, the research results were applied to the welding simulation of the whole side-wall module. The shape of the molten pool obtained using the combined heat source was closer to that of the experiments (error < 10%), demonstrating the accuracy and effectiveness of the developed the heat source model for laser welding simulation. For local model laser welding using the TCCM, a coarse mesh was used, and the weld was divided into four segments, and highly accurate results were obtained. This calculation time was only 5.97% of that of a moving heat source in case of the thermo-elastic-plastic method (TEPM). Residual stress and welding deformation of the stainless steel side-wall module were calculated according to actual process parameters and the results of local model simulation. Residual stress was discontinuously distributed at the weld segments, and it only slightly influenced the overall stress distribution. The maximum residual stress (462.15 MPa) occurred at the weld of the large crossbeam. Welding eight small and two large crossbeams influenced the deformation change and the maximum deformation (1.26 mm) appeared in the middle position of the left side-wall. The findings of this study show that the TCCM has high calculation accuracy and is sufficiently economical for predicting laser welding of large structures.

Investigation of laser welding development and application on high standard stainless steel railway vehicle

Laser Welding Parameters and Tensile Properties of Partial Penetration Lap Joint for Stainless Train Body

Application of laser welding technology for automobile body manufacturing and design of laser welding cell

Research on Car Galvanized Tailor-Welded Blanks of Fiber Laser Welding

Investigation on electron beam welding of dissimilar wrought/selective laser melting AISI 304 stainless steel plates

Laser welding simulation of large-scale assembly module of stainless steel side-wall

Weld morphology and mechanical properties in laser spot welding of quenching and partitioning 980 steel

Research on Laser Welding Critical Speeds of High-strength Steels for Automobile with Different Thickness

Effect of Weld Parameters on Weld Quality in Sheet to Tube Joining with Simulation and Experimental Research

Ultrasonic Non-Destructive Testing and Evaluation of Stainless-Steel Resistance Spot Welding Based on Spiral C-Scan Technique

Investigations on high-power laser beam-submerged arc hybrid welding of thick duplex stainless steel using laser beam wobbling

APPLICATION OF LASER TECHNOLOGY TO WELDING QUALITY CONTROL AND INSPECTION

Quality inspection of micro solder joints in laser spot welding by laser ultrasonic method

Microstructures and Mechanical Properties on Laser Welded Joints of Automotive High Strength Complex Phase Steel

Experimental Research and Numerical Simulation of Laser Welding of 303Cu/440C-Nb Stainless-Steel Thin-Walled Natural-Gas Injector for Vehicles

Research development on laser beam welding of aeronautical aluminium alloy

Effect of Laser-Arc Hybrid Welding Process on Carbon Steel Welds Back Formation

Influence of laser strengthening techniques on anti-wear and anti-fatigue properties of rail welding joint

Research on laser welding of vehicle body

A Review on Microstructural Features and Mechanical Properties of Wheels/Rails Cladded by Laser Cladding

WELDING OF HIGH-MANGANESE STEEL CROSSING AND HIGH-CARBON STEEL RAIL