Abstract:The processes of metal additive manufacturing (AM) are no longer confined to rapid prototyping applications and are seeing increasing use in many fields for the production of tools and finished products. The ability to design parts with practically zero waste, high precision, complex geometry, and on-demand fabrication are among the advantages of this manufacturing approach. One of the drawbacks of this technique is the productivity rate, as the parts are made layer by layer, which also increases the production cost. Moreover, even the working space is limited, especially for the powder bed fusion technique. In view of these disadvantages and in order to guarantee the profitability of this process, it should be oriented to the production of complex components that have a limited volume with a design adapted to additive manufacturing. One solution with which to circumvent these drawbacks is to combine the 3D printing process with conventional manufacturing processes. When designing products, one may choose to use additive manufacturing to create locally complex parts and assemble them with parts produced by conventional processes. On the other hand, and due to the limited AM printing chamber space, it may be necessary to print large parts in multiple smaller parts and then assemble them. In order to investigate the weldability of stainless steel 316L parts produced by laser powder bed fusion (L-PBF), the mechanical behavior of different welding assemblies is tested. Five configurations are studied: non-welded AM specimens, two AM parts welded together, one AM part and one laser cut part welded together, two laser-cut parts welded together, and non-welded laser cut specimens. Welding is performed using the Pulsed Gas Metal Arc Welding process (GMAW-P). Specimen strength is assessed through static and fatigue tests. The results demonstrate that 316L AM parts are weldable, and the tensile and fatigue properties of L-PBF 316L welded components and welded laser cut components are comparable. GMAW-P welding led to lower fatigue results for AM components than for other configurations, but the difference is not important. It was observed that welding defects may have a direct impact on mechanical properties.

Microstructure and Mechanical Properties of Selective Laser Melting 316L/R-316L Butt Joint Welded by Laser Welding

A Comparable Study on Laser Welding Behaviors of Selective Laser Melted 304 Stainless Steel, Inconel 718 Superalloy and Ti-6Al-4V Alloy

Effect of post-weld heat treatment on the microstructure and mechanical properties of laser-welded joints of SLM-316 L/rolled-316 L

Laser Welding of AISI 316L Stainless Steel Produced by Additive Manufacturing or by Conventional Processes

Tensile Properties of Selective Laser Melted 316L Stainless Steel

Investigation on electron beam welding of dissimilar wrought/selective laser melting AISI 304 stainless steel plates

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Effect of Welding Speed on Microstructure and Mechanical Properties of Selective Laser Melting Inconel 625 Alloy Laser Welded Joint

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Microstructure and mechanical properties of CuCrZr/316L hybrid components manufactured using selective laser melting

Weldability of 316L Parts Produced by Metal Additive Manufacturing

Microstructure and Fatigue Damage of 316L Stainless Steel Manufactured by Selective Laser Melting (SLM)

Study of Microstructural Inhomogeneity and Its Effects on Mechanical Properties of Multi-Layer Laser Welded Joint

Enhanced strength–ductility synergy and transformation-induced plasticity of the selective laser melting fabricated 304L stainless steel

Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting

Effect of Material States on Microstructure and Properties of GH4169 Superalloy Laser-Welded Joint

Mechanical behavior of selective laser melted 316L stainless steel

Microstructure and anisotropic tensile performance of 316L stainless steel manufactured by selective laser melting

Characteristics of Metal Specimens Formed by Selective Laser Melting: A State-of-the-Art Review

Microstructural evolution and mechanical properties of laser-welded joints of medium manganese steel

Selective laser melting 316L/CuSn10 multi-materials: Processing optimization, interfacial characterization and mechanical property