Abstract:Accurate prediction of welding residual stresses is often challenging due to the complexity of the welding process which includes moving heat source, temperature-dependent material properties etc. Over the past two decades or so, the numerical simulation technologies have been widely used in the welding process and a number of numerical models have been proposed to predict temperature field and residual stresses field induce by welding process. In the previous numerical simulations, the weldment was either in Free State or rigidly constrained. Such manipulations can not reflect the realistic constraint conditions of the weldment. In this simulation, clamps and backing board are all included in the model as elastic body and analytical rigid body, respectively. In the thermal analysis, the thermolysis of clamps and backing board can be equivalent to forced convection heat transfer, where the coefficients of forced convection heat transfer are temperature dependent; in the mechanical analysis, both the contact interaction between clamps and weldment and the contact interaction between backing board and weldment are considered, normal and tangent contact interaction properties are assumed as "HARD" contact and Coulomb friction, respectively. After welding process, residual compressive plastic strains existing in the weld zone and HAZ are the sources of residual stresses. Post welding cold rolling is an effective and convenient method to reduce residual compressive plastic strains induces by welding especially for thin-walled structure. In the previous researches, either welding process and cold rolling process were treated as two separate processes or only the residual stresses induced by welding process was considered as initial condition in the cold rolling process. In this simulation, welding residual stresses, plastic strains and deformations are all imported as the initial state of the cold rolling process to increase the accuracy of the numerical simulation. The import of plastic strains will affect the accuracy of the numerical simulation for the material which has obvious work harden effect.

Numerical Simulation on Residual Stress of Steel Rail Longitudinal Stainless Steel Overlaying Welding

Finite element simulation of welding process and real-time monitoring assessment

Investigation of Welding Residual Stress in Flash-Butt Joint of U71mn Rail Steel by Numerical Simulation and Experiment

Numerical Investigation of Residual Stress Formation Mechanisms in Flash-Butt Welded Rail

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

High precision modeling of welding and post welding cold rolling continuous process in numerical simulation

Combining welding-induced residual stress with thermal and mechanical stress in continuous welded rail

Numerical Study on Welding Residual Stress Distribution of Corrugated Steel Webs

Numerical Investigations on Residual Stress in Laser Penetration Welding Process of Ultrafine-Grained Steel

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Effects of rail flash-butt welding and post-weld heat treatment processes meeting different national standards on residual stresses of welded joints

Influence of residual stress on drop-weight test performance of rail welded joint

Process optimization to control welding distortion of aluminum alloy train roof by high efficiency numerical simulation

Numerical computation methods of welding deformation and their application in bogie frame for high-speed trains

Study on FEM Numerical Simulation Method for the Welding Distortion

Influence of welding residual stress on subsurface fatigue crack propagation of rail

Effect of different welding parameters on residual stress and deformation of 20/0Cr18Ni9 dissimilar metal arc-welding joint

Residual Stress Redistribution Analysis in the Repair Welding of AA6082-T6 Aluminum Alloy Joints: Experiment and Simulation

Factors Influencing the Perceived Level-Straight Quality of the Welded Rail Joints

Numerical Application Research on the Welding Residual Stress of a Super-tall Giant Transfer Truss

On stress and deformation accumulation of continuously welded rails under cyclic thermal loading in high-speed railways