Abstract:Electrothermal performance of Resistive Random Access Memory (RRAM) composed of five different resistive switching oxides is studied numerically in this paper. Finite element method-based parallel computing simulator is employed to conduct the electrothermal simulation of both RRAM cell and array. Simulation results indicate that NiO and ZrO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> RRAMs generate higher heat than HfO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> , TiO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> and ZnO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> RRAMs, as their electric conductivity are higher in the same voltage. During the reset, ZnO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> RRAM requires lower voltage to be transferred into high-resistance state due to its higher oxygen vacancy drift rate. The heat crosstalk problem in RRAM array is also investigated, which can decrease reliability during the reset of RRAM. Inactive cells can be transferred into high-resistance state unintentionally with stored information lost. In the same voltage, both HfO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> and TiO <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">x</inf> RRAMs are less affected by heat crosstalk due to their lower oxygen vacancy drift rate.

Characteristics of hafnium oxide resistance random access memory with different setting compliance current

Electrothermal Modeling and Simulation of Resistive Random Access Memory (RRAM) with Different Resistive Switching Oxides

Resistive Switching Characteristics in HfOx Layer by Using Current Sweep Mode

Current Compliance Impact on the Variability of HfO2-based RRAM Devices

Investigation of Resistive Switching in Cu-Doped Hfo2 Thin Film for Multilevel Non-Volatile Memory Applications

A nanoscale study of hafnium oxide resistive memory switching dynamics

Influence of Selector-Introduced Compliance Current on Hfox Rram Switching Operation

Resistive switching characteristics of hafnium oxide with CU doping for nonvolatile memory application

Study on ion dynamics of hafnium oxide RRAM by electrode thermal effect

Low Operation Current of Si/HfO2 Double Layers Based RRAM Device with Insertion of Si Film

Solving the issue of increasing forming voltage during device miniaturization in hafnium oxide-based resistive access memory using high-k sidewall material

Modeling the conduction mechanisms of intrinsic multi-level states in HfO<sub>x</sub>-based resistive random access memory

Improvement of Hafnium Oxide Resistive Memory Performance Through Low-Temperature Supercritical Oxidation Treatments

The Effect of Current Compliance on the Resistive Switching Behaviors in TiN/ZrO<sub>2</sub>/Pt Memory Device

Set Statistics in Conductive Bridge Random Access Memory Device with Cu/Hfo2/Pt Structure

An Indirect Way to Achieve Comprehensive Performance Improvement of Resistive Memory: when Hafnium Meets ITO in an Electrode.

Enhancement of Resistive Switching Performance in Hafnium Oxide (HfO2) Devices via Sol-Gel Method Stacking Tri-Layer HfO2/Al-ZnO/HfO2 Structures

Memory Devices: Direct Observations of Nanofilament Evolution in Switching Processes in HfO2‐Based Resistive Random Access Memory by in Situ TEM Studies (adv. Mater. 10/2017)

Complementary Metal Oxide Semiconductor Compatible Hf-Based Resistive Random Access Memory with Ultralow Switching Current/Power

Improved Resistive Switching Uniformity in $ \hbox{cu/hfo}_{2}/\hbox{pt}$ Devices by Using Current Sweeping Mode

Direct Observations of Nanofilament Evolution in Switching Processes in HfO2‐Based Resistive Random Access Memory by in Situ TEM Studies