Abstract:This work focuses on continuously operated spray granulation processes in horizontal fluidized beds highlighting the influence of process conditions on the particle properties of the resulting product granules. The drying process has a decisive influence on the kinetics of the growth rate and thus also on the properties of the particles, such as the morphological structure, particle moisture content and porosity as well as density, compression strength and the wetting behavior. This influence has been considered in this study in more detail on the basis of the model material sodium benzoate. In order to compare the produced granules at different drying conditions and spray rates of the suspension an external product classification was used to achieve a certain product granule size. The obtained experimental results show a deep influence of the thermal conditions onto granule morphology and structural properties, which is in qualitative agreement with recent experimental observations (Rieck et al., 2015; Hoffmann et al., 2015a; Schmidt et al., 2017b). The overall trend of the results reveal smoother product granules with decreasing spray rates of the suspension and increasing drying temperatures. These smoother surface morphologies lead to a more homogeneous layering which has as a consequence that the internal particle porosity is decreasing while the solids density and the compression strength of the particles are increasing at the same time. In this study the purely qualitative classification of the surface texture from previous experimental studies was extended by the topographic analysis of the product granules, giving the possibility to quantify the morphological structure by means of roughness measurements. This makes the morphological design accessible as product property and permits the utilization of models that describe the morphology according to the process conditions.

Coupled CFD-PBE Simulation of Nucleation in Fluidized Bed Spray Granulation

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Distribution and Movement of Fine Particles Injected in a Gas–solid Fluidized Bed with Hydrocarbon Liquid Spray

On the Applicability of the Coarse Grained Coupled CFD-DEM Model to Predict the Heat Transfer During the Fluidized Bed Drying of Pharmaceutical Granules

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

Influence of separation properties and processing strategies on product characteristics in continuous fluidized bed spray granulation

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

COMPUTER SIMULATION OF FLUIDIZED BED GRANULATION BY A TWO-DIMENSIONAL RANDOM COALESCENCE MODEL

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Influence of drying conditions on layer porosity in fluidized bed spray granulation

Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process

Product-Property Guided Scale-Up of a Fluidized Bed Spray Granulation Process Using the CFD-DEM Method

Correlating Granule Surface Structure Morphology and Process Conditions in Fluidized Bed Layering Spray Granulation

Numerical Simulation of Fluidized Bed Coating Process Considering Particle Abrasion

DEM/CFD Modelling of the Deposition of Dilute Granular Systems in a Vertical Container

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Application of Definitive Screening Design to Quantify the Effects of Process Parameters on Key Granule Characteristics and Optimize Operating Parameters in Pulsed-Spray Fluid-Bed Granulation

Computational Granular Dynamics Simulation of Unsteady Movement in Particle Moving Bed

Spray granulation for drug formulation