Abstract:This work focuses on continuously operated spray granulation processes in horizontal fluidized beds highlighting the influence of process conditions on the particle properties of the resulting product granules. The drying process has a decisive influence on the kinetics of the growth rate and thus also on the properties of the particles, such as the morphological structure, particle moisture content and porosity as well as density, compression strength and the wetting behavior. This influence has been considered in this study in more detail on the basis of the model material sodium benzoate. In order to compare the produced granules at different drying conditions and spray rates of the suspension an external product classification was used to achieve a certain product granule size. The obtained experimental results show a deep influence of the thermal conditions onto granule morphology and structural properties, which is in qualitative agreement with recent experimental observations (Rieck et al., 2015; Hoffmann et al., 2015a; Schmidt et al., 2017b). The overall trend of the results reveal smoother product granules with decreasing spray rates of the suspension and increasing drying temperatures. These smoother surface morphologies lead to a more homogeneous layering which has as a consequence that the internal particle porosity is decreasing while the solids density and the compression strength of the particles are increasing at the same time. In this study the purely qualitative classification of the surface texture from previous experimental studies was extended by the topographic analysis of the product granules, giving the possibility to quantify the morphological structure by means of roughness measurements. This makes the morphological design accessible as product property and permits the utilization of models that describe the morphology according to the process conditions.

Correlating Granule Surface Structure Morphology and Process Conditions in Fluidized Bed Layering Spray Granulation

Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process

Influence of drying conditions on layer porosity in fluidized bed spray granulation

Product-Property Guided Scale-Up of a Fluidized Bed Spray Granulation Process Using the CFD-DEM Method

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

Influence of separation properties and processing strategies on product characteristics in continuous fluidized bed spray granulation

Spray granulation for drug formulation

Mechanistic modelling of fluid bed granulation, Part I: Agglomeration in pilot scale process

Coupled CFD-PBE Simulation of Nucleation in Fluidized Bed Spray Granulation

Application of Definitive Screening Design to Quantify the Effects of Process Parameters on Key Granule Characteristics and Optimize Operating Parameters in Pulsed-Spray Fluid-Bed Granulation

The role of adding nanoparticles and surfactant to the enzyme liquid binder in fluidized bed granulation process

Melt granulation in fluidized bed: a comparative study of spray-on versus in situ procedure

COMPUTER SIMULATION OF FLUIDIZED BED GRANULATION BY A TWO-DIMENSIONAL RANDOM COALESCENCE MODEL

Control of segregation by non-uniform aeration in a fluidized bed spray granulator

Continuous wet granulation using fluidized-bed techniques I. Examination of powder mixing kinetics and preliminary granulation experiments

Empirical prediction model based process optimization for droplet size and spraying angle during pharmaceutical fluidized bed granulation

Study growth kinetics in fluidized bed granulation with at-line FBRM

Inferential control of product properties for fluidized bed spray granulation layering

Experimental investigation on granulation conditions for production of granular calcium dihydrogen phosphate by spray process in a fluidized bed

Effects of Process Variables on the Size, Shape, and Surface Characteristics of Microcrystalline Cellulose Beads Prepared in a Centrifugal Granulator

Cold Experiment of Slag Centrifugal Granulation by Rotary Atomizer: Effect of Atomizer Configuration