Silicon coating treatment to improve high temperature corrosion resistance of 9%Cr steels

M. P. Hill

DOI: https://doi.org/10.1179/mst.1989.5.8.835

IF: 1.8

1989-08-01

Materials Science and Technology

Abstract:A silicon coating process is described which confers good protection on 9% Cr steels and alloys in CO2 based atmospheres at high temperatures and pressures. The coatings are formed by decomposition of silane at temperatures above 720 K. Protective layers are typically up to 1 μm thick. The optimum coating conditions are discussed. The chemical state of the coatings has been investigated by X-ray photoelectron spectroscopy and has demonstrated the importance of avoiding silicon oxide formation during processing. Corrosion testing has been carried out for extended periods, up to 20 000 h, at temperatures between 753 and 853 K, in a simulated advanced gas cooled reactor gas at 4 MPa pressure. Benefit factors of up to 60 times have been measured for 9% Cr steels. Even higher values have been measured for 9Cr–Fe binary alloy on which a 1 μm coating was sufficient to eliminate significant oxidation over 19 000 h except at the specimen edges. The mechanism of protection is discussed. It is suggested that a silicon surface coating for protecting steels from high temperature corrosion has some advantages over adding silicon to the bulk metal. MST/1090

materials science, multidisciplinary,metallurgy & metallurgical engineering