Abstract:The anisotropy of the critical current density (Jc) and its influence on measurement of irreversibility field (Birr) has been investigated for high quality, in-situ MgB2 strands. Comparison of transport and magnetization measurements has revealed the onset of a regime where large differences exist between transport and magnetically measured values of the critical current density and Birr. These effects, initially unexpected due to the lack of crystalline texture in these in-situ processed strands, appear to be due to a fibrous microstructure, connected with the details of the wire fabrication and MgB2 formation reactions. Scanning electron micrographs of in-situ-processed MgB2 monocore strands have revealed a fibrous microstructure. Grains (~100 nm) are randomly oriented, and there is no apparent local texture of the grains. However, this randomly oriented polycrystalline material has a fibrous texture at a larger length scale, with stringers of MgB2 (~ 60 {\mu}m long and ~5 {\mu}m in diameter) partially separated by elongated pores -- the spaces previously occupied by stringers of elemental Mg. This leads to an interpretation of the differences observed in transport and magnetically determined critical currents, in particular a large deviation between the two at higher fields, in terms of different transverse and longitudinal connectivities within the strand. The different values of connectivity also lead to different resistive transition widths, and thus irreversibility field values, as measured by transport and magnetic techniques. Finally, these considerations are seen to influence estimated pinning potentials for the strands.

Power-Law Relationship Between Critical Current Density, Microstructure, and the n-Value in MgB2 Superconductor Wires

Supercurrents in magnesium diboride/metal composite wire

High transport critical currents in dense, metal-clad superconductor wires of MgB2

Influence of Amorphous Boron Grain Size, High Isostatic Pressure, Annealing Temperature, and Filling Density of Unreacted Material on Structure, Critical Parameters, n-Value, and Engineering Critical Current Density in MgB2 Wires

Fabrication and Superconducting Properties of MgB2 Wires with Amorphous Carbon Doping by In-situ Powder-in-tube Method

Magnetocaloric Effect and Critical Behavior in Melt-Extracted Gd60Co15Al25microwires (phys. Status Solidi A 9∕2015)

Interaction of superconductor with magnetic sheath as a way for improvement of critical current in MgB2/Fe superconductor

The doping effect of multiwall carbon nanotube on MgB2/Fe superconductor wire

Effect of Nano-SiC and Nano-Si Doping on Critical Current Density of MgB 2

Microscopic role of carbon on MgB2 wire for critical current density comparable to NbTi

Thin Film Magnesium Boride Superconductor with Very High Critical Current Density and Enhanced Irreversibility Field

Critical Current Density Performance of Malic Acid Doped Magnesium Diboride Wires at Different Operating Temperatures

Anisotropic Connectivity and its Influence on Critical Current Densities, Irreversibility Fields, and Flux Creep in In-Situ-Processed MgB2 Strands

Properties of superconducting MgB_2 wires: "in-situ" versus "ex-situ" reaction technique

Microstructure and high critical current of powder in tube MgB2

Fundamental nature of the self-field critical current in superconductors

High Critical Current Density of a MgB 2 Bulk Superconductor High-pressure Synthesized Directly from the Elements

Iron-Sheath Influence on the Superconductivity of Mgb2 Core in Wires and Tapes

MgB 2 Superconducting Joint Technique Based on Mg Diffusion Method

Enhanced critical current density at high magnetic fields in MgB2 wire processed by in-situ spark plasma sintering

Comparative study on the critical current performance of Bi-2223/Ag and YBCO wires in low magnetic fields at liquid nitrogen temperature