Abstract:The MgB2 coated superconducting tapes have been fabricated on textured Cu (0 0 1) and polycrystalline Hastelloy tapes using coated conductor technique, which has been developed for the second generation high temperature superconducting wires. The MgB2/Cu tapes were fabricated over a wide temperature range of 460-520 °C by using hybrid physical-chemical vapor deposition (HPCVD) technique. The tapes exhibited the critical temperatures (Tc) ranging between 36 and 38 K with superconducting transition width (\DeltaTc) of about 0.3-0.6 K. The highest critical current density (Jc) of 1.34 \times 105 A/cm2 at 5 K under 3 T is obtained for the MgB2/Cu tape grown at 460^{\circ}C. To further improve the flux pinning property of MgB2 tapes, SiC is coated as an impurity layer on the Cu tape. In contrast to pure MgB2/Cu tapes, the MgB2 on SiC-coated Cu tapes exhibited opposite trend in the dependence of Jc with growth temperature. The improved flux pinning by the additional defects created by SiC-impurity layer along with the MgB2 grain boundaries lead to strong improvement in Jc for the MgB2/SiC/Cu tapes. The MgB2/Hastelloy superconducting tapes fabricated at a temperature of 520 °C showed the critical temperatures ranging between 38.5 and 39.6 K. We obtained much higher Jc values over the wide field range for MgB2/Hastelloy tapes than the previously reported data on other metallic substrates, such as Cu, SS, and Nb. The Jc values of Jc(20 K, 0 T) \sim5.8 \times 106 A/cm2 and Jc(20 K, 1.5 T) ~2.4 \times 105 A/cm2 is obtained for the 2-\mum-thick MgB2/Hastelloy tape. This paper will review the merits of coated conductor approach along with the HPCVD technique to fabricate MgB2 conductors with high Tc and Jc values which are useful for large scale applications.

High transport critical currents in dense, metal-clad superconductor wires of MgB2

High transport critical current density obtained for Powder-In-Tube-processed MgB2 tapes and wires using stainless steel and Cu-Ni tubes

Supercurrents in magnesium diboride/metal composite wire

Fabrication and Properties of Multifilamentary MgB2 Wires by In-Situ Powder-in-tube Process

High Critical Current Density of a MgB 2 Bulk Superconductor High-pressure Synthesized Directly from the Elements

Superconductivity in Dense $MgB_2$ Wires

Improved superconducting properties of MgB2

Fabrication and Superconducting Properties of MgB2 Wires with Amorphous Carbon Doping by In-situ Powder-in-tube Method

MgB2 coated superconducting tapes with high critical current densities fabricated by hybrid physical-chemical vapor deposition

Large transport critical currents in unsintered MgB2 superconducting tapes

Microstructure and high critical current of powder in tube MgB2

MgB 2 Superconducting Joint Technique Based on Mg Diffusion Method

Possibilities of MgB2/Cu Wires Fabricated by the in-situ Reaction Technique

Amorphous B coated Mg nanopowder induces low angle grain boundaries and enhances J c of MgB 2 wire

High performance new MgB2 superconducting hollow wires

Improving superconducting properties of 100 m class MgB 2 wire with 18+1 filaments produced via internal Mg diffusion process

Properties of superconducting MgB_2 wires: "in-situ" versus "ex-situ" reaction technique

Superconducting properties of the powder-in-tube Cu-Mg-B and Ag-Mg-B wires

Ultrahigh Current-Carrying Capability in Clean MgB2 Films

Transport and magnetic Jc of MgB2 strands and small helical coils

Thin Film Magnesium Boride Superconductor with Very High Critical Current Density and Enhanced Irreversibility Field