Abstract:High-temperature superconductor has high critical temperature, high transport current capacity and low energy consumption, which correspondingly offer the wide applications in the field of electric power. As an important concern, the mechanical properties of superconductor carried with transport current have received extensive attention. Still, its mechanical properties in various electromagnetic environments are under study. Most of previous studies are based on the assumption of uniform distribution of critical current density, and only few researches based on the non-uniform distribution of critical current density are carried out. In this work, the mechanical flux pinning response of cylindrical superconducting structures is studied. Considering the non-uniform features of critical current density along the radial direction, the distribution law of induced magnetic field and current for the cylindrical superconducting structure is obtained based on the Bean model. Combined with the plane strain method, the analytical expression of magnetic flux pinning force, stress and magnetostriction in the superconducting structure are obtained. The results show that the uneven distribution of critical current density causes the flux pinning force to change, which further leads the superconductor' s local radial stress to vary with the critical current density. When the transport current flowing through the superconductor is increased in the ascending field, the radial stress and the hoop stress both appear compressive. The non-uniform distribution of critical current density has no significant effect on the overall trend of the internal stress, but displays an obvious influence on the stress distribution, and the superconducting structure is compressed and deformed. The results are consistent with those in the uniform case. When the transport current decreases during field descending, the critical current starts to reverse from the outermost part, then the compressive stress and tensile stress exist simultaneously. The hoop stress has a discontinuous point at the discontinuous portion of the critical current density, thus the damage probability is higher than that of the uniform distribution. In other words, the shear strength of superconductor is required to be higher for application. Also, the degree of magnetostriction is higher when the distribution of critical current density is set to be uniform, that is, the non-uniform distribution of the critical current density causes the superconducting structure to undergo greater deformation. Therefore, in engineering applications, the structural strength of the superconducting material must be enhanced to cope with the challenge from the uneven distribution of critical current density.

Fundamental nature of the self-field critical current in superconductors

Critical Current Correlations and Regressions Across the Superconducting Parameter Space of REBCO Wires, B||c

The Critical Current of Disordered Superconductors near T=0

Procedures for proper validation of record critical current density claims

Magnetic field oscillations of the critical current in long ballistic graphene Josephson junctions

A peak in the critical current for quantum critical superconductors

Upper Critical Fields Well above 100 T for the Superconductorsmfeaso0.85f0.15withtc

High, Magnetic Field Independent Critical Currents In (Ba,K)Fe2as2 Crystals

Power-Law Relationship Between Critical Current Density, Microstructure, and the n-Value in MgB2 Superconductor Wires

Interpretation of experimental Critical Current Density and Levitation of Superconductors, and a second Temperature Limit to protect Superconductors against Quench

MEASUREMENT OF CRITICAL CURRENT FOR HIGH TEMPERATURE SUPERCONDUCTORS

Self-field effects upon the critical current density of flat superconducting strips

A pulsed current set-up for use in magnetic fields above 30 T; application to high-temperature superconductors

Comments on "Fundamental nature of the self-field critical current in superconductors",

Transport Critical Currents in the Iron Pnictide Superconducting Wires Prepared by the Ex Situ Pit Method

Critical Current Density of Y-Ba-Cu-Sn-O Superconductors

A Critical Current Measurement Method for Strip Hard Superconductors Utilizing Pulsed Current

Comparative study on the critical current performance of Bi-2223/Ag and YBCO wires in low magnetic fields at liquid nitrogen temperature

On the origin of the controversial electrostatic field effect in superconductors

Critical Current of Bi2223 Superconducting Tape and Extended Exponential Model

Effects of Critical Current Density on Mechanical Properties of Cylindrical Superconductors