Abstract:Iron-based superconductors have strong potential for magnet applications through their very high upper critical field, low anisotropy and manufacturability through the powder-in-tube (PIT) route. The engineering critical current density (Je) is a key parameter for measuring the maximum current density that superconducting materials can withstand in practical applications. It serves as a bridge between theoretical research and practical applications of superconductors and has great significance in promoting the development and application of superconducting technology. In this study, Ag sheathed Ba0.6K0.4Fe2As2 (Ba-122) iron-based superconducting tapes were prepared by using the process of drawing, flat rolling and heat treatment by hot pressing (HP). For the first time, the filling factor of the tapes increased to about 40%, leading to a reduction in the volume fraction of Ag, consequently lowering the overall cost. The optimal parameters for achieving high transport Je were obtained by comparing the effects of different HP pressures on the properties and micro-morphology of the tapes. The prepared mono-filament tapes are capable of carrying the transport Je of 4.1 × 104 A/cm2 (Ic = 350 A) at 4.2 K, 10 T, marking the highest Je reported for Ba-122 wires and tapes to date. Our results show that high transport Je can be obtained in Ba-122 superconducting tapes, and iron-based superconductors have a promising future in practical applications.

High, Magnetic Field Independent Critical Currents In (Ba,K)Fe2as2 Crystals

High-Field Critical Current Enhancement by Irradiation Induced Correlated and Random Defects in (Ba0.6k0.4)fe2as2

Approaching the ultimate superconducting properties of (Ba,K)Fe2As2 by naturally formed low-angle grain boundary networks

Upper Critical Fields and Anisotropy of BaFe 1.9 Ni 0.1 As 2 Single Crystals

Upper Critical Fields Well above 100 T for the Superconductorsmfeaso0.85f0.15withtc

Single-Crystal Growth and Extremely High H-c2 of 12442-Type Fe-Based Superconductor KCa2Fe4As4F2

Upper Critical Field, Anisotropy, And Superconducting Properties Of Ba1-Xkxfe2as2 Single Crystals

Low field anomaly in the critical current of Ba1‐xKxFe2As2 tapes

High Transport Current Superconductivity in Powder-in-tube Ba0.6K0.4Fe2As2 Tapes at 27T

Enhanced flux pinning by refined structural/magnetic domains in nickel-doped BaFe 2 As 2 single crystals

Significant Enhancement Of Upper Critical Fields By Doping And Strain In Iron-Based Superconductors

Enhancement of Critical Current Densities in (Ba,K)Fe2As2 by 320 MeV Au Irradiation in Single Crystals and by High-Pressure Sintering in PIT Wires

Huge magnetostriction in superconducting single-crystalline BaFe$_{1.908}$Ni$_{0.092}$As$_{2}$

High tolerance of the superconducting current to large grain boundary angles in potassium-doped BaFe 2 As 2

Low-temperature Transport Properties of Doped Ba0.57K0.43Fe2As2 Superconductors in High Magnetic Field

Iron-Based Superconductors for High-Field Applications: Realization of High Engineering Critical Current Density

Giant enhancement in critical current density, up to a hundredfold, in superconducting NaFe 0.97 Co 0.03 As single crystals under hydrostatic pressure

Vortex Creep and Critical Current Densities in Superconducting (ba,k)fe2as2 Single Crystals

Anisotropic physical properties and large critical current density in KCa${_2}$Fe${_4}$As${_4}$F${_2}$ single crystal

Low-temperature transport properties of doped Ba 0.57 K 0.43 Fe 2 As 2 superconductors in high magnetic field

Fishtail Effect and the Vortex Phase Diagram of Single Crystal Ba0.6K0.4Fe2As2