Application of Hydrogen Permeation Techniques to Assess the Effect of Inhibitors in Hydrochloric Steel Pickling of Low‐C Steels and Interstitial‐Free Steels
Valentina Colla,Renzo Valentini,Fernanda Di Giorgio
DOI: https://doi.org/10.1002/srin.202400081
IF: 2.1258
2024-05-17
steel research international
Abstract:A prototypical experimental setup is described which develops hydrogen permeation tests to evaluate the effective aggressiveness of HCl during pickling, through the measurement of the permeation current. A simple and fast procedure is presented, with a potential for industrial implementation to support monitoring and optimization of the pickling process conditions and enable early countermeasures that avoid under/overpickling defects. The acid pickling phase, generally entrusted to HCl‐based solutions, plays a fundamental role in the production of low‐C and interstitial‐free steel coils. Very often, however, pickling operations are challenging due to the possible onset of surface defects (underpickling, overpickling, appearance of surface defects, etc.) linked to complex phenomena involving numerous factors, such as acid concentration, Fe ions in solution, temperature, time, steel type, and scale structure. Moreover, the use of inhibitors, which is essential for controlling the pickling process, represents one of the major challenges. Their dosage, although minimal, must be carefully chosen based on the type of processed coils and other plant engineering variables. The flow of hydrogen that is generated on the surface of the steel during etching causes absorption of hydrogen by the metal and its measurement is strictly linked to the phenomena occurring during scale removal. The correlation of data obtained from a Devanathan double‐cell hydrogen permeation system to results of other techniques, such as weight loss, surface analysis, metallography, and electron microscopy shows that this system can be effectively used to indirectly measure the solution aggressiveness. This experimental approach is applied to two industrial steels: a simple carbon base and an interstitial free Ti steel.
metallurgy & metallurgical engineering