Global Measurement Method for Large-Scale Components Based on a Multiple Field of View Combination

Yang Zhang,Wei Liu,Zhiguang Lan,Zhiyuan Zhang,Fan Ye,Haiyang Zhao,Xiaodong Li,Zhenyuan Jia

DOI: https://doi.org/10.1155/2017/8765450

IF: 2.336

2017-01-01

Journal of Sensors

Abstract:Considering the limited measurement range of a machine vision method for the three-dimensional (3D) surface measurement of large-scale components, a noncontact and flexible global measurement method combining a multiple field of view (FOV) is proposed in this paper. The measurement system consists of two theodolites and a binocular vision system with a transfer mark. The process of multiple FOV combinations is described, and a new global calibration method is proposed to solve the coordinate system unification issue of different instruments in the measurement system. In addition, a high-precision image acquisition method, which is based on laser stripe scanning and centre line extraction, is discussed to guarantee the measurement efficiency. With the measured 3D data, surface reconstruction of large-scale components is accomplished by data integration. Experiments are also conducted to verify the precision and effectiveness of the global measurement method.

engineering, electrical & electronic,instruments & instrumentation

What problem does this paper attempt to address?

### Problems the Paper Attempts to Solve

This paper aims to address the issue of limited measurement range in 3D surface measurement of large components. Specifically, traditional machine vision methods struggle to quickly complete on-site measurements of large components due to the limited measurement range of a single instrument. Particularly in the aerospace and aviation fields, it is not allowed to attach markers on the surface of components, and these components are usually fixed on brackets before assembly, causing parts of the surface to be obscured, making certain measurement areas invisible from specific angles. Therefore, researching non-contact and flexible global measurement methods is crucial for high-quality aerospace and aviation assembly.

### Main Contributions

1. **Proposed a non-contact global measurement method based on multi-field combination**: This method combines two theodolites and a binocular vision system, using transfer markers to achieve coordinate system conversion between different positions.
2. **Solved the problem of unifying different instrument coordinate systems**: A new global calibration method is proposed to ensure that measurement data from different instruments can be unified in a global coordinate system.
3. **High-precision image acquisition method**: Based on laser stripe scanning and centerline extraction methods, ensuring measurement efficiency.
4. **Experimental validation**: The accuracy and effectiveness of this method were verified through experiments, demonstrating its potential in practical applications.

### Application Background

In modern manufacturing and assembly fields, the dimensional accuracy requirements of large components are very high to ensure the automatic assembly of high-end equipment. To ensure that components are manufactured according to design, their dimensions must be accurately measured. However, the measurement range of large components is too large, making it difficult to quickly complete on-site measurements using a single instrument. Particularly in the aerospace and aviation fields, it is not allowed to attach markers on the surface of components, and these components are usually fixed on brackets before assembly, causing parts of the surface to be obscured, making certain measurement areas invisible from specific angles. Therefore, researching non-contact and flexible global measurement methods is crucial for high-quality aerospace and aviation assembly.

### Method Overview

1. **Measurement Principle**: The measurement system consists of two theodolites and a binocular vision system with transfer markers. By converting surface information captured from different positions into a global coordinate system, high-precision data fusion is achieved.
2. **Calibration Method**: Includes calibration of the theodolites, binocular cameras, and their conversion relationships.
3. **Algorithm Description**: Includes laser stripe extraction, image matching, and reconstruction algorithms.
4. **Experimental Validation**: The flexibility and accuracy of the measurement method were verified through experiments.

### Experimental Results

- **Accuracy Evaluation**: By measuring the feature points of a 1D target, the measurement accuracy of the system was verified, with a maximum global measurement deviation of 0.103%.
- **3D Measurement Experiment**: A standard planar component and a curved composite component were measured, and the results showed that the system could effectively measure curved components.

### Conclusion

This paper proposes a global measurement method based on multi-field combination for measuring the 3D surface of large components. Compared with existing methods, this method has the advantages of efficiency and no need to attach target markers on the component surface. Experimental results show that the maximum measurement accuracy of this method in the laboratory is 0.103%, making it suitable for 3D surface measurement of large components in industrial sites. This measurement system can be applied to the assembly process of large industrial components. Future research suggests further improving the system's accuracy and robustness.