A Combined Measurement Method for Large-Size Aerospace Components

Zhilong Zhou,Wei Liu,Qiong Wu,Yuxin Wang,Binchao Yu,Yi Yue,Jiabo Zhang
DOI: https://doi.org/10.3390/s20174843
IF: 3.9
2020-08-27
Sensors
Abstract:Automated and high-accuracy three-dimensional (3D) shape measurement is required in quality control of large-size components for the aerospace industry. To eliminate the contradiction between global measurement and local precision measurement control in 3D digitalization for the key local features of the large-size components, a combined measurement method is proposed, including a 3D scanner, a laser tracker, and an industrial robot used as an orienting device, to achieve high-accuracy measurement. As for improving the overall measurement accuracy, an accurate calibration method based on coordinate optimization of common points (COCP) and coordinate optimization of global control points (COGP) is proposed to determine the coordinate systems. Firstly, a coordinate optimization method of common points (COCP) is recommended. Then, a coordinate optimization method of global control points (COGP) based on the angular constraint is proposed for minimizing the measurement errors and improving the measurement accuracy of the position and orientation of the 3D scanner. Finally, a combined measurement system is established, and validation experiments are carried out in laboratory within a distance of 4 m. The calibration experiment results demonstrate that the max and mean errors of the coordinate transformation have been reduced from 0.037 and 0.022 mm to 0.021 and 0.0122 mm. Additionally, the measurement experiment results also show that the combined measurement system features high accuracy.
engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the need for high - precision online three - dimensional shape measurement of key local features of large - scale components in the aerospace industry. Specifically, existing single - measurement devices are difficult to simultaneously meet the requirements of a large - area measurement range and high - precision local features. In addition, current measurement methods and systems have limited research in error control and cannot meet the requirements for high - precision online measurement of key local features. Therefore, this paper proposes a comprehensive measurement method that combines 3D scanners, laser trackers, and industrial robots, aiming to expand the measurement range while ensuring the overall measurement accuracy, and proposes a new calibration method to improve the overall measurement accuracy of the system.