Abstract:Understanding and controlling the impurity behavior are important for low-cost and high-efficiency of multi-crystalline silicon solar cells.We employ the infrared spectroscopy to study the change of oxygen and carbon concentrations after thermal treatment in different parts of multi-crystalline silicon ingots grown by directional solidification technology.In correlation with the solar cell performances such as theminority carrier lifetime,photoelectric conversion efficiency and internal quantum efficiency,we investigate the physical mechanism of the effects of various concentrations of oxygen and carbon on cell performance.We propose an oxygen precipitation growth model considering the influence of carbon to simulate the size distribution and concentration of oxygen precipitation after the thermal treatment.It is found that carbon not only deteriorates the efficiency of the cells made from the silicon from the top part of the ingot,but also plays an important role in the effect of oxygen precipitation：enhancing the size and the quantity of oxygen precipitation in the silicon from the middle part of the ingot,which induces the defect and increases the recombination;while resulting in the small size and low quantity of oxygen precipitation in the silicon from the bottom part due to the low carbon content,thereby improving the cell efficiency through gettering impurities.We further demonstrate the complex behaviors of oxygen and carbon by a two-step thermal treatment technique,from which we point out that the two-step thermal treatment is applicable only to the improvement of the efficiency of solar cells from the bottom part of multi-crystalline silicon ingots.

Efficiency Enhancement of Multicrystalline Silicon Solar Cells by Inserting Two-Step Growth Thermal Oxide to the Surface Passivation Layer

Enhanced Si Passivation and PERC Solar Cell Efficiency by Atomic Layer Deposited Aluminum Oxide with Two-step Post Annealing

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

SURFACE PASSIVATION OF THERMAL OXIDATION OF SiO2 FILM ON INFLUENCE TO PERFORMANCE OF CRYSTALLINE SILICON SOLAR CELLS

Significant Improvement of Passivation Performance by Two-Step Preparation of Amorphous Silicon Passivation Layers in Silicon Heterojunction Solar Cells*

Application of SiO2 Passivation Technique in Mass Production of Silicon Solar Cells

Small Pyramidal Textured Ultrathin Crystalline Silicon Solar Cells with Double-Layer Passivation.

Double layer antireflection coating for high-efficiency passivated emitter silicon solar cells

Industrial High Throughput Emitter Formation and Thermal Oxidation for Silicon Solar Cells by the High Temperature Stack Oxidation Approach

Research on Dual-Layer Passivation Films of the Crystalline Silicon Solar Cell

Oxygen and Carbon Behaviors in Multi-Crystalline Silicon and Their Effect on Solar Cell Conversion Efficiency

SiO2 Passivation Layer Grown by Liquid Phase Deposition for Silicon Solar Cell Application

Enhancement of the Conversion Efficiency of Selective Emitter PERC Solar Cells by Post-Oxidation

Improved efficiency of multicrystalline silicon solar cells by TiO2 antireflection coatings derived by APCVD process

Interfacial Engineering of Cu 2 O Passivating Contact for Efficient Crystalline Silicon Solar Cells with an Al 2 O 3 Passivation Layer

Efficiency improvement of PERC solar cell using an aluminum oxide passivation layer prepared via spatial atomic layer deposition and post-annealing

Rapid Thermal Annealing and Hydrogen Passivation of Polycrystalline Silicon Thin-Film Solar Cells on Low-Temperature Glass

Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells

Optimization of the Surface Structure on Black Silicon for Surface Passivation

Tuning Back Side Passivation for Enhancing the Performance of PERC Solar Cells

Solution-Processed Titanium Oxide for Rear Contact Improvement in Heterojunction Solar Cells