Abstract:Understanding of liquid jet breakup dynamics and spray formation in annular swirling crossflows is crucial to optimize the atomization and mixing of liquid fuels in gas turbine engine combustors. In this study, hybrid Eulerian-Lagrangian method is utilized for the simulation of spray atomization, which combines the Volume-of-Fluid method to capture the liquid-gas interface, and a Lagrangian droplet tracking approach to resolve the secondary breakup and the dilute spray cloud. Adaptive mesh refinement is adopted to cluster grid points around the liquid-gas interface. The liquid jet of fuel is injected radially outwards into the swirling air crossflow in an annular computational domain, while the swirling number varies from 0, 0.45 to 0.85. The breakup process and spray structures in the swirling flows are systematically compared with that in the non-swirling flow. It is found that column and surface breakup coexist in the studied cases. The column breakup is dominated by the amplified KH instability waves on the column surface. The liquid column breakup in a bag/shear mode, where holes are formed at the surface wave trough. It is first found that the azimuthal surface wave is greatly amplified in the swirling crossflow, which affects the column and surface breakup. The amplification and interactions of the axial and azimuthal surface waves on the transverse edges lead to the surface breakup. The forming ligaments are preferably connected with the axial surface wave crest. The penetration depth of jet column decreases a little in the swirling crossflow, while the droplets spread more outwardly downstream. The spray trajectory can be approximately described by the empirical models with case-sensitive coefficients. The angular deflection in the swirling flow is roughly linearly varied with axial distance. The PDFs of droplet sizes generally follow the log-normal distribution in the swirling crossflow.

Numerical simulation of the aerobreakup of a water droplet

Numerical Simulation of Liquid Droplet Breakup in Supersonic Flows

Single and two-phase fluid droplet breakup in impulsively generated high-speed flow

Deformation Characteristics of Droplet Generated by Rayleigh Jet Breakup

A consistent volume-of-fluid approach for direct numerical simulation of the aerodynamic breakup of a vaporizing drop

Two-phase Interactions between Propagating Shock Waves and Evaporating Water Droplets

Two-dimensional Simulation of Drop Deformation and Breakup at Around the Critical Weber Number

Multiscale Simulation of Liquid Jet Breakup in Swirling Crossflows: Breakup Mechanism and Spray Structures

Two-dimensional numerical simulation of hydrodynamic behaviors of drop covered with vapor film

Numerical Simulation of Liquid Droplet Coalescence and Breakup

Detailed numerical investigation of the drop aerobreakup in the bag breakup regime

Numerically Simulating Droplet Breakup in Droplet Swarm Using Modified Level Set Method with Multi-Levels

Numerical Investigation of a Planar Shock Wave Interacting with an Acentric Water Ring

A systematic study of a droplet breakup process in decaying homogeneous isotropic turbulence using a mesoscopic simulation approach

Numerical simulation of jet break‐up using the local front reconstruction method

Experimental Study on Droplet Breakup in an Orifice Jet Mixer

Exploration of Shock–droplet Interaction Based on High-Fidelity Simulation and Improved Theoretical Model

An Experimental Investigation on the Secondary Breakup of Carboxymethyl Cellulose Droplets

Numerical Simulation of the Collision Behaviors of Binary Unequal-Sized Droplets at High Weber Number

Numerical simulation of jet break-up in the second-wind induced regime using the local front reconstruction method

Two-dimensional Navier–Stokes simulation of breaking waves