Abstract:Understanding of liquid jet breakup dynamics and spray formation in annular swirling crossflows is crucial to optimize the atomization and mixing of liquid fuels in gas turbine engine combustors. In this study, hybrid Eulerian-Lagrangian method is utilized for the simulation of spray atomization, which combines the Volume-of-Fluid method to capture the liquid-gas interface, and a Lagrangian droplet tracking approach to resolve the secondary breakup and the dilute spray cloud. Adaptive mesh refinement is adopted to cluster grid points around the liquid-gas interface. The liquid jet of fuel is injected radially outwards into the swirling air crossflow in an annular computational domain, while the swirling number varies from 0, 0.45 to 0.85. The breakup process and spray structures in the swirling flows are systematically compared with that in the non-swirling flow. It is found that column and surface breakup coexist in the studied cases. The column breakup is dominated by the amplified KH instability waves on the column surface. The liquid column breakup in a bag/shear mode, where holes are formed at the surface wave trough. It is first found that the azimuthal surface wave is greatly amplified in the swirling crossflow, which affects the column and surface breakup. The amplification and interactions of the axial and azimuthal surface waves on the transverse edges lead to the surface breakup. The forming ligaments are preferably connected with the axial surface wave crest. The penetration depth of jet column decreases a little in the swirling crossflow, while the droplets spread more outwardly downstream. The spray trajectory can be approximately described by the empirical models with case-sensitive coefficients. The angular deflection in the swirling flow is roughly linearly varied with axial distance. The PDFs of droplet sizes generally follow the log-normal distribution in the swirling crossflow.

Numerically Simulating Droplet Breakup in Droplet Swarm Using Modified Level Set Method with Multi-Levels

Experimental Study on Droplet Breakup in an Orifice Jet Mixer

Droplet Breakup in A Square-Sectioned Pulsed Disc and Doughnut Column

Numerical Simulation of Liquid Droplet Breakup in Supersonic Flows

Study of Droplet Breakage in a Pulsed Disc and Doughnut Column-Part I: Experiments and Correlations

Direct Measurement of Droplet Breakage in A Pulsed Disc and Doughnut Column

Deformation Characteristics of Droplet Generated by Rayleigh Jet Breakup

Numerical Simulation of the Collision Behaviors of Binary Unequal-Sized Droplets at High Weber Number

Combining Level-Set Method and Population Balance Model to Simulate Liquid–liquid Two-Phase Flows in Pulsed Columns

Numerical simulation of the aerobreakup of a water droplet

Experimental Study on Drop Breakup Time and Breakup Rate with Drop Swarm in a Stirred Tank

Controllable Multiple Mixing Monodisperse Droplet Streams Generation Using Wavelength-Modulated Disturbances

Multiscale Simulation of Liquid Jet Breakup in Swirling Crossflows: Breakup Mechanism and Spray Structures

An Experimental Investigation on the Secondary Breakup of Carboxymethyl Cellulose Droplets

Experimental Study on Drop Breakup Time and Breakup Rate with Drop Swarms in a Stirred Tank

Numerical Simulations of Molten Breakup Behaviors of a de Laval-Type Nozzle, and the Effects of Atomization Parameters on Particle Size Distribution

Single and two-phase fluid droplet breakup in impulsively generated high-speed flow

Numerical Simulation of Liquid Droplet Coalescence and Breakup

Droplet breakup and rebound during impact on small cylindrical superhydrophobic targets

Direct Numerical Simulation of Droplet Breakup in Homogeneous Isotropic Turbulence: the Effect of the Weber Number

Measurement of droplet breakage in a pump-mixer