Abstract:The electrohydrodynamic breakup of a droplet under a combined electric field (EF) and shear flow field (SFF) is experimentally investigated. The interface morphology characteristics of the droplet undergoing different breakup patterns are analyzed, and the interactions among electric forces, viscous forces, and interfacial tension during the droplet breakup process are also revealed. In addition, a diagram of droplet breakup patterns with different hydrodynamic and electric capillary numbers (Ca and CaE, respectively) is summarized. In particular, a prediction model for the criteria of droplet breakup under combined EF and SFF is proposed. The results indicate that three typical patterns of droplet breakup occur in turn with increasing CaE, i.e., satellite droplet detachment from a migrating droplet, a lobe detachment pattern, and a lobe disintegration pattern. As the Ca increases, the breakup pattern of satellite droplets detaching from the migrating droplet gradually disappears, and the critical CaE for droplet breakup decreases because the enhanced viscous force facilitates the detachment of the lobes from the mother droplet. Additionally, the breakup pattern of charged lobe disintegration occurs under a large CaE when the charge of the droplet reaches the Rayleigh limit. The critical CaE of the lobe disintegration breakup pattern decreases first and then increases with increasing Ca because the changes in droplet shape, interfacial tension, electrical potential energy, and fluid potential energy lead to a variation in the Rayleigh limit. Moreover, the breakup speeds of the three patterns are also altered by the strengths of the SFF and EF. Particularly, a reliable prediction model for the criterion of droplet breakup is proposed and compared with experimental data. This model provides a feasible approach for determining the criterion of droplet breakup through a very small amount of data for droplet-based applications.

Study of Droplet Breakage in a Pulsed Disc and Doughnut Column-Part I: Experiments and Correlations

Direct Measurement of Droplet Breakage in A Pulsed Disc and Doughnut Column

Droplet Breakup in A Square-Sectioned Pulsed Disc and Doughnut Column

Population Balance of Droplets in a Pulsed Disc and Doughnut Column with Wettable Internals

Experimental Study on Droplet Breakup in an Orifice Jet Mixer

Measurement of droplet breakage in a pump-mixer

Numerically Simulating Droplet Breakup in Droplet Swarm Using Modified Level Set Method with Multi-Levels

CFD–PBM simulation of two-phase flow in a pulsed disc and doughnut column with directly measured breakup kernel functions

Combining Level-Set Method and Population Balance Model to Simulate Liquid–liquid Two-Phase Flows in Pulsed Columns

An Experimental Investigation on the Secondary Breakup of Carboxymethyl Cellulose Droplets

Droplet Size Distribution in Annular Flow Affected by the Breakup and Coalescence Processes

Augmented CFD–PBM Simulation of Liquid–Liquid Two-Phase Flows in Liquid Extraction Columns with Wettable Internal Plates

Experimental study on the differences between bubble and drop breakages in agitated turbulent flows

Influence of Dispersed-Phase Viscosity on Droplet Breakup in a Continuous Pump-Mixer

CFD-PBM Investigation on Droplet Size Distribution in a Liquid–Liquid Stirred Tank: Effect of Impeller Type

Experimental Study on Drop Breakup Time and Breakup Rate with Drop Swarms in a Stirred Tank

Experimental Investigation and Theoretical Prediction of Droplet Breakup under a Combined Electric Field and Shear Flow Field

Breakup Dynamics of Emulsion Droplet and Effects of Inner Interface

Interface‐shrinkage‐driven Breakup of Droplets in Microdevices with Different Dispersed Fluid Channel Shape

A CFD‐PBM‐ANN framework to simulate the liquid–liquid two‐phase flow in a pulsed column

Simulation of Drop Breakage in Liquid–liquid System by Coupling of CFD and PBM: Comparison of Breakage Kernels and Effects of Agitator Configurations