Abstract:The droplet breakup behaviors under the action of shock wave are frequently observed in liquid-fueled deto-nation-based engines. In this work, the secondary droplet size distribution after the breakup of a sub-milimeter droplet under high velocity cross flow conditions (the gas flow velocity is 105.64 m/s) was experimentally determined on a horizontal shock tube with the developed digital in-line holography technique. During the droplet breakup process, the spatial (two-dimensional, three-dimensional) and droplet size distributions of two characteristic stages (early and late stages) were majorly concerned based on the reconstructed droplet cloud field. At the early stage, the liquid-mist field appeared as the barrel shape, and the probability distribution of the droplet number in the cross-stream direction presented as "M shape". While the secondary droplet cloud field appeared as the conical shape, and the probability distribution presented as the parabolic shape at the late stage. Both the probability distribution of the droplet number along the flow direction increased firstly then decreased at the early and late stages with the increasing of distance. In addition, the peak position of the droplet number probability distribution also changed with time. The secondary droplets mainly distributed in the range of 0~20 mu m for the early and late stages, and its number accounted for more than 93%. Meanwhile, the corresponding volume probabilities changed from 12% to 72%, due to the consistent stripping process. In addition, the droplet size distribution could be well described by the log-normal and root-normal distribution curves at both stages. The study of the spatial and droplet size distributions is believed to be of importance for corresponding droplet breakup modeling.

Direct Measurement of Droplet Breakage in A Pulsed Disc and Doughnut Column

Study of Droplet Breakage in a Pulsed Disc and Doughnut Column-Part I: Experiments and Correlations

Droplet Breakup in A Square-Sectioned Pulsed Disc and Doughnut Column

CFD-PBM Investigation on Droplet Size Distribution in a Liquid–Liquid Stirred Tank: Effect of Impeller Type

Population Balance of Droplets in a Pulsed Disc and Doughnut Column with Wettable Internals

Experimental Study on Droplet Breakup in an Orifice Jet Mixer

Experimental Measurement of Bubble Breakup in a Jet Bubbling Reactor

Quantifying the Spatial-Temporal Evolution of Rim/Ligament in Drop Breakup Via Digital In-Line Holography

Measurement of droplet breakage in a pump-mixer

Characterization of the Bag Breakup of Liquid Drop Using High-Speed Digital In-Line Holography

Modelling of Mass Transfer for Gas-Liquid Two-Phase Flow in Bubble Column Reactor with a Bubble Breakage Model Considering Bubble-Induced Turbulence

Numerically Simulating Droplet Breakup in Droplet Swarm Using Modified Level Set Method with Multi-Levels

CFD–PBM simulation of two-phase flow in a pulsed disc and doughnut column with directly measured breakup kernel functions

An Experimental Investigation on the Secondary Breakup of Carboxymethyl Cellulose Droplets

Combining Level-Set Method and Population Balance Model to Simulate Liquid–liquid Two-Phase Flows in Pulsed Columns

Breakup Phenomenon of Droplets Impacting on a Superhydrophobic Brass Surface

A CFD‐PBM‐ANN framework to simulate the liquid–liquid two‐phase flow in a pulsed column

Augmented CFD–PBM Simulation of Liquid–Liquid Two-Phase Flows in Liquid Extraction Columns with Wettable Internal Plates

Experimental Study on Drop Breakup Time and Breakup Rate with Drop Swarms in a Stirred Tank

Secondary Droplet Size Distribution Upon Breakup of a Sub-Milimeter Droplet in High Speed Cross Flow

Influence of Dispersed-Phase Viscosity on Droplet Breakup in a Continuous Pump-Mixer