Abstract:With the popularity of multirotor aircraft, the aerodynamic noise it generates has an increasingly serious impact on the environment. A fast method for globally predicting the tonal noise is proposed in this study. The goal of this method is to predict the global aerodynamic noise at a small computational cost, then providing a fast model for online noise prediction and control. Firstly, the global noise model of a single rotor in acoustic modal domain is established by using the near-field acoustic holography method. Then, the global noise model of a rotor with different configurations is obtained by using the mapping relationship of acoustic modal coefficients. Subsequently, the global noise of multirotor is predicted based on the configuration information of rotors by using the wave superposition principle. To validate the performance of this method, the predicted global noises of single rotor and multi rotors were compared with other numerical methods. It is revealed that the acoustic modal analysis can accurately predict global noise at a small computational cost. Moreover, a parametric study was conducted to evaluate the effect of different configurations on the global noise. The mechanism of phase synchronization method was analyzed comprehensively at the same time. Lastly, experiments were carried out in the anechoic chamber to validate the method proposed. When the separation distance between rotor shafts is greater than 2.8 R, the aerodynamic interference between the rotors can be ignored and the method can be well applied globally. Otherwise, the aerodynamic interference result in predictions that do not match the experiments at higher elevation angles, e.g. 60°. Meanwhile, as the elevation angle decreases, the prediction error decreases rapidly.

Development and validation of a hybrid method for predicting helicopter rotor impulsive noise

Numerical analysis on the high-speed impulsive noise propagation characteristic of helicopter rotor in the presence of strong shear flow

Aeroacoustic modeling of helicopter transonic rotor noise

Aerodynamic Noise Prediction of a Centrifugal Fan Considering the Volute Effect Using IBEM

High-efficiency prediction method for helicopter global/ground noise based on near-field acoustic holography

Investigation of a Virtual Blade Method for Aerodynamic and Acoustic Prediction of Helicopter Rotors

Prediction of helicopter rotor noise in hover using FW-H analogy

Noise generated by a helicopter rotor

A High Efficiency Method for Calculating the Aeroacoustic Noise of Transonic Rotors

Transonic Hovering Rotor Aeroacoustic Predictions Using Navier-Stokes/Kirchhoff Method

A novel hybrid method for aerodynamic noise prediction of high-lift devices

Global prediction and analysis for helicopter noise footprint based on acoustic modes

Impact of Tip-Vortex Modeling Uncertainty on Helicopter Rotor Blade–Vortex Interaction Noise Prediction

Fast prediction method for multirotor global tonal noise based on acoustic modal analysis

Application of High-Order WENO Scheme in the CFD/FW–H Method to Predict Helicopter Rotor Blade–Vortex Interaction Tonal Noise

Unsteady Aerodynamic Noise Prediction of Contra-Rotating Open Rotor Using Meshless Method

Numerical Study on Aerodynamic and Noise Responses of Rotor with Ramp Increase in Collective Pitch Based on Time-Accurate Free-Wake Method

Numerical study of acoustic source localization of rotor using a novel discrete noise analysis strategy

Quadrupole-Enhanced Overset Noise Predictions for Counter-Rotating Open Rotors

Active and Passive Helicopter Noise Reduction Using the AVINOR/HELINOIR Code Suite

An efficient hybrid aeroacoustic method to predict the noise of a ducted coaxial-rotor UAV