Abstract:International Journal of Aeroacoustics, Ahead of Print. In order to obtain the influence mechanism of the rotor noise and the local aerodynamic variation under different operating conditions, a novel discrete noise analysis strategy for the acoustic source localization is established. The analysis strategy has two aspects including the blade division method and the noise contribution calculation method. Firstly, the body-fitted rotor blade grids are preprocessed and refined at the division position before the flowfield simulation. Then, based on the flowfield result, the blade grids are divided into several blocks in the chordwise and spanwise directions, and the acoustic pressure of each block is predicted. Finally, a discriminant function for the contribution of the block to the rotor noise is proposed, and the acoustic source localization is carried out. The URANS equations and FW-H equations are used to capture high-fidelity flowfield and rotor acoustic pressure. Parameters such as the block position in different direction on the rotor blade and the collective pitches are quantified, and the relationship between air flow and aeroacoustics is discussed in detail. Some conclusions are obtained by analyzing the BO105 model rotor in hover. The acoustic pressure produced by the leading edge of the upper surface could cancel about 50% acoustic pressure of the remainder of these blocks. Increasing the force at this position will be benefit to the noise reduction. Acoustic source distribution is closely linked to the flow separation near the blade tip: the main acoustic source moves toward around 0.9 R section of the blade in the spanwise direction, and it moves from the leading edge towards the trailing edge in the chordwise direction.

A High Efficiency Method for Calculating the Aeroacoustic Noise of Transonic Rotors

Transonic Hovering Rotor Aeroacoustic Predictions Using Navier-Stokes/Kirchhoff Method

Aeroacoustic modeling of helicopter transonic rotor noise

Numerical analysis on the high-speed impulsive noise propagation characteristic of helicopter rotor in the presence of strong shear flow

Static Aeroelasticity Analysis of a Rotor Blade Using a Gauss-Seidel Fluid-Structure Interaction Method

Numerical study of acoustic source localization of rotor using a novel discrete noise analysis strategy

Noise generated by a helicopter rotor

Numerical Simulation and Aerodynamic Investigation of the Intermeshing Rotor in Hover

Development and validation of a hybrid method for predicting helicopter rotor impulsive noise

Efficient Numerical Techniques for Simulating a Rotorcraft Flow Field with Overlapping Grids

Numerical Simulation on the Inviscid Flowfield of Transonic Hovering Rotor Using Implicit Method and WENO Schemes

Unsteady Aerodynamic Noise Prediction of Contra-Rotating Open Rotor Using Meshless Method

Combination of Advanced Actuator Line/Disk Model and High-Order Unstructured Finite Volume Solver for Helicopter Rotors

Comparison of the Noise Directivity Pattern of the Main Rotor of a Helicopter for Flight and Hover Modes

Numerical simulation of the effect of helicopter flight advance ratio and lift rate on rotor aerodynamic noise

Application of High-Order WENO Scheme in the CFD/FW–H Method to Predict Helicopter Rotor Blade–Vortex Interaction Tonal Noise

Numerical Study on Aerodynamic and Noise Responses of Rotor with Ramp Increase in Collective Pitch Based on Time-Accurate Free-Wake Method

Euler solutions of transonic flow for a helicopter rotor in hover using multigrid method

Panel/full-span Free-Wake Coupled Method for Unsteady Aerodynamics of Helicopter Rotor Blade

Simulating Unsteady Aerodynamics of Helicopter Rotor with Panel/viscous Vortex Particle Method

Highly Efficient Unsteady Panel Time-Marching Free Wake for Aerodynamics of Rotorcraft