Abstract:Aerodynamic noise includes a number of noise components, among which rotational noise and vortex noise (BVI-noise) make the largest contribution to the overall noise generated. Rotation noise depends on the magnitude of the velocity of the incoming blade and prevails over other noise components at significant Mach Mach numbers. Unlike rotation noise, vortex noise is evident at low helicopter flight speeds, moderate Mach numbers. In the formation of this type of noise,an important role is played by the longitudinal geometry. Therefore, recently the shape of the helicopter blade is chosen close to existing natural forms, which are as balanced as possible. One of these may be a wing-shaped blade. In this work, the problem of generating BVI noise by the wing shaped blade of a helicopter is posed and solved. The mathematical model of the problem is constructed on the previously proposed by the author and successfully tested system of aeroacoustic equations for the general case. Estimated features in this system are pulsations of sound pressure and sound potential. The calculated data of these quantities, as well as their derivatives, were used to study near and far sound fields. In particular, the dependence of the density ripple distribution is revealed from the blade geometry, the angle of attack and the blade angle to the oncoming flow. Increasing flow velocity contributes to the emergence of transverse ripples on the surface blades that dominate the longitudinal ripples by level. An interesting feature noticed in the calculations is that there are calculations for moderate Mach numbers M=0.2,0.3 situations, at certain angles of blade placement to the stream and angles of attack where rotation noise dominates eddy noise. For values Mach numbers M>0.4 rotation noise plays a major role in blade noise generation. The noise level generated is in the range 50dB≤L≤60dB, which is lower by 5-6dB for the Blue Edge blade, as well as the rounded blade. In addition, activation of the high-frequency region in the frequency spectrum of noise was observed f≈840Hz. The results of the calculations show that the blade of the wing-shaped is low-noise in the mode of maneuvers at small flight speeds.

Noise generated by a helicopter rotor

Aerodynamic Noise Prediction of a Centrifugal Fan Considering the Volute Effect Using IBEM

Development and validation of a hybrid method for predicting helicopter rotor impulsive noise

Transonic Hovering Rotor Aeroacoustic Predictions Using Navier-Stokes/Kirchhoff Method

Numerical analysis on the high-speed impulsive noise propagation characteristic of helicopter rotor in the presence of strong shear flow

A High Efficiency Method for Calculating the Aeroacoustic Noise of Transonic Rotors

Aeroacoustic modeling of helicopter transonic rotor noise

Prediction of helicopter rotor noise in hover using FW-H analogy

BVI-noise generation by wing-shaped helicopter blade

Numerical Simulation and Aerodynamic Investigation of the Intermeshing Rotor in Hover

Active and Passive Helicopter Noise Reduction Using the AVINOR/HELINOIR Code Suite

Numerical investigation on the use of various blade tips for the helicopter's main rotor blade in forward flight regarding aerodynamic performance and HSI noise considerations

Comparison of the Noise Directivity Pattern of the Main Rotor of a Helicopter for Flight and Hover Modes

Investigation of Rotor Noise Shielding Effects by the Helicopter Fuselage in Forward Flight

A new blade tip geometry to improve aerodynamic performance and acoustic noise of helicopter blade in hovering flight

High-efficiency prediction method for helicopter global/ground noise based on near-field acoustic holography

Experimental study of the turbulence ingestion noise of rotor blades

Numerical simulation of the effect of helicopter flight advance ratio and lift rate on rotor aerodynamic noise

Unsteady Aerodynamic Noise Prediction of Contra-Rotating Open Rotor Using Meshless Method

Numerical study of acoustic source localization of rotor using a novel discrete noise analysis strategy

Analytic Prediction of Rotor Broadband Noise with Serrated Trailing Edges with Applications to Urban Air Mobility Aircraft