Abstract:International Journal of Aeroacoustics, Ahead of Print. In order to obtain the influence mechanism of the rotor noise and the local aerodynamic variation under different operating conditions, a novel discrete noise analysis strategy for the acoustic source localization is established. The analysis strategy has two aspects including the blade division method and the noise contribution calculation method. Firstly, the body-fitted rotor blade grids are preprocessed and refined at the division position before the flowfield simulation. Then, based on the flowfield result, the blade grids are divided into several blocks in the chordwise and spanwise directions, and the acoustic pressure of each block is predicted. Finally, a discriminant function for the contribution of the block to the rotor noise is proposed, and the acoustic source localization is carried out. The URANS equations and FW-H equations are used to capture high-fidelity flowfield and rotor acoustic pressure. Parameters such as the block position in different direction on the rotor blade and the collective pitches are quantified, and the relationship between air flow and aeroacoustics is discussed in detail. Some conclusions are obtained by analyzing the BO105 model rotor in hover. The acoustic pressure produced by the leading edge of the upper surface could cancel about 50% acoustic pressure of the remainder of these blocks. Increasing the force at this position will be benefit to the noise reduction. Acoustic source distribution is closely linked to the flow separation near the blade tip: the main acoustic source moves toward around 0.9 R section of the blade in the spanwise direction, and it moves from the leading edge towards the trailing edge in the chordwise direction.

Prediction of helicopter rotor noise in hover using FW-H analogy

Aeroacoustic modeling of helicopter transonic rotor noise

Development and validation of a hybrid method for predicting helicopter rotor impulsive noise

Comparison of the Noise Directivity Pattern of the Main Rotor of a Helicopter for Flight and Hover Modes

Transonic Hovering Rotor Aeroacoustic Predictions Using Navier-Stokes/Kirchhoff Method

Investigation of a Virtual Blade Method for Aerodynamic and Acoustic Prediction of Helicopter Rotors

Numerical simulation of the effect of helicopter flight advance ratio and lift rate on rotor aerodynamic noise

Aerodynamic and Aero-acoustic Analysis of Helicopter Rotor Blades in Hover

Noise generated by a helicopter rotor

Numerical study of acoustic source localization of rotor using a novel discrete noise analysis strategy

A High Efficiency Method for Calculating the Aeroacoustic Noise of Transonic Rotors

Numerical analysis on the high-speed impulsive noise propagation characteristic of helicopter rotor in the presence of strong shear flow

Quadrupole-Enhanced Overset Noise Predictions for Counter-Rotating Open Rotors

Numerical analyses of aeroacoustic characteristics of tiltrotor considering the aerodynamic interaction by the fuselage in hover

Impact of Tip-Vortex Modeling Uncertainty on Helicopter Rotor Blade–Vortex Interaction Noise Prediction

High-efficiency prediction method for helicopter global/ground noise based on near-field acoustic holography

Investigation on Aerodynamic Noise Characteristics of Coaxial Rotor in Hover

Numerical Study on Aerodynamic and Noise Responses of Rotor with Ramp Increase in Collective Pitch Based on Time-Accurate Free-Wake Method

Active and Passive Helicopter Noise Reduction Using the AVINOR/HELINOIR Code Suite

Numerical analysis of rotor aeroacoustic characteristics during collective pitch aperiodic variation in hover

Investigation of Rotor Noise Shielding Effects by the Helicopter Fuselage in Forward Flight