Abstract:In this study, Na as the n‐type dopant is introduced in the polycrystalline Bi2Te3 material for enhancing the thermoelectric and mechanical properties. Benefitting from the synergistic optimization of electrical and thermal transport properties, a maximum ZT value of 1.03 is achieved at 303 K for the Bi2Te3‐0.25 wt% sample, which is 70% higher than that of the pristine sample. The recent growing energy crisis draws considerable attention to high‐performance thermoelectric materials. n‐type bismuth telluride is still irreplaceable at near room temperature for commercial application, and therefore, is worthy of further investigation. In this work, nanostructured Bi2Te3 polycrystalline materials with highly enhanced thermoelectric properties are obtained by alkali metal Na solid solution. Na is chosen as the cation site dopant for n‐type polycrystalline Bi2Te3. Na enters the Bi site, introducing holes in the Bi2Te3 matrix and rendering the electrical conductivity tunable from 300 to 1800 Scm–1. The solid solution limit of Na in Bi2Te3 exceeds 0.3 wt%. Owing to the effective solid solution, the Fermi level of Bi2Te3 is properly regulated, leading to an improved Seebeck coefficient. In addition, the scattering of both charge carriers and phonons is modulated, which ensured a high‐power factor and low lattice thermal conductivity. Benefitting from the synergistic optimization of both electrical and thermal transport properties, a maximum figure of merit (ZT) of 1.03 is achieved at 303 K when the doping content is 0.25 wt%, which is 70% higher than that of the pristine sample. This work disclosed an effective strategy for enhancing the performance of n‐type bismuth telluride‐based alloy materials.

Effect of reducing agent strength on the growth and thermoelectric performance of nanocrystalline bismuth telluride

Microstructure and thermoelectric properties of porous Bi 2 Te 2.85 Se 0.15 bulk materials fabricated by semisolid powder processing

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n‐type Bi2Te3

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n-type Bi<sub>2</sub>Te<sub>3</sub>

Enhanced Thermoelectric Performance of Solution-Derived Bismuth Telluride Based Nanocomposites Via Liquid-Phase Sintering

Significant enhancement in the thermoelectric performance of a bismuth telluride nanocompound through brief fabrication procedures

Development of Nanostructured Bi2Te3 with High Thermoelectric Performance by Scalable Synthesis and Microstructure Manipulations

High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys

Controlled Growth of Bismuth Antimony Telluride Bi Sb2−Te3 Nanoplatelets and Their Bulk Thermoelectric Nanocomposites

Wet-chemical synthesis and consolidation of stoichiometric bismuth telluride nanoparticles for improving the thermoelectric figure-of-merit

Enhancing Thermoelectric Performance of n-Type Bi2Te2.7Se0.3 through Incorporation of Amorphous Si3N4 Nanoparticles

High thermoelectric and mechanical performance in strong-textured n-type Bi2Te2.7Se0.3 by temperature gradient method

Enhancement in thermoelectric performance of bismuth telluride based alloys by multi-scale microstructural effects

Tuning Multiscale Microstructures to Enhance Thermoelectric Performance of N‐type Bismuth‐Telluride‐Based Solid Solutions

Thermoelectric Performance Enhancement in N -Type Bi 2 (tese) 3 Alloys Owing to Nanoscale Inhomogeneity Combined with a Spark Plasma-Textured Microstructure

A simple fast microwave-assisted synthesis of thermoelectric bismuth telluride nanoparticles from homogeneous reaction-mixture

Synthesis and Thermoelectric Properties of Bi2te3 Based Nanocomposites

Enhancing Thermoelectric Performance of N-Type Hot Deformed Bismuth-Telluride-Based Solid Solutions by Nonstoichiometry-Mediated Intrinsic Point Defects.

BiSbTe-based nanocomposites with high ZT: The effect of SiC nanodispersion on thermoelectric properties

Enhanced thermoelectric and mechanical properties of Bi0.5Sb1.5Te3 alloy with dispersed yttrium oxide ceramic nanoparticles

Effect of Doping and Annealing on Thermoelectric Properties of Bismuth Telluride Thin Films