Abstract:Grain refinement strongly strengthens the non‐basal slip of Bi2Te3‐based thermoelectric material, and then increase the carrier concentration, hindering the practical preparation of n‐type Bi2Te3 by ball milling method. In this work, enhancing the ball milling energy can facilitate the recovery effect during hot pressing, which can reduce and stabilize the carrier concentration and achieve high thermoelectric and mechanical performances. The carrier concentration in n‐type layered Bi2Te3‐based thermoelectric (TE) material is significantly impacted by the donor‐like effect, which would be further intensified by the nonbasal slip during grain refinement of crushing, milling, and deformation, inducing a big challenge to improve its TE performance and mechanical property simultaneously. In this work, high‐energy refinement and hot‐pressing are used to stabilize the carrier concentration due to the facilitated recovery of cation and anion vacancies. Based on this, combined with SbI3 doping and hot deformation, the optimized carrier concentration and high texture degree are simultaneously realized. As a result, a peak figure of merit (zT) of 1.14 at 323 K for Bi2Te2.7Se0.3 + 0.05 wt.% SbI3 sample with the high bending strength of 100 Mpa is obtained. Furthermore, a 31‐couple thermoelectric cooling device consisted of n‐type Bi2Te2.7Se0.3 + 0.05 wt.% SbI3 and commercial p‐type Bi0.5Sb1.5Te3 legs is fabricated, which generates the large maximum temperature difference (ΔTmax) of 85 K at a hot‐side temperature of 343 K. Thus, the discovery of recovery effect in high energy refinement and hot‐pressing has significant implications for improving TE performance and mechanical strength of n‐type Bi2Te3, thereby promoting its applications in harsh conditions.

Tuning Multiscale Microstructures to Enhance Thermoelectric Performance of N‐type Bismuth‐Telluride‐Based Solid Solutions

Enhancement in thermoelectric performance of bismuth telluride based alloys by multi-scale microstructural effects

Enhancing Thermoelectric Performance of N-Type Hot Deformed Bismuth-Telluride-Based Solid Solutions by Nonstoichiometry-Mediated Intrinsic Point Defects.

Tunable Optimum Temperature Range of High-Performance Zone Melted Bismuth-Telluride-Based Solid Solutions

Attaining high mid-temperature performance in (Bi,Sb) 2 Te 3 thermoelectric materials via synergistic optimization

Multi-scale hierarchical microstructure modulation towards high room temperature thermoelectric performance in <i>n</i>-type Bi<sub>2</sub>Te<sub>3</sub>-based alloys

Liquid‐Phase Hot Deformation to Enhance Thermoelectric Performance of N‐type Bismuth‐Telluride‐Based Solid Solutions

Enhanced Thermoelectric and Mechanical Properties of Zone Melted P-Type (bi,sb)2te3 Thermoelectric Materials by Hot Deformation

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n‐type Bi2Te3

Modulation of Vacancy Defects and Texture for High Performance n‐Type Bi2Te3 via High Energy Refinement

Synergistically Optimized Thermoelectric and Mechanical Properties in p ‐Type BiSbTe by a Microdroplet Deposition Technique

Tailoring interfacial states for improved n-type bismuth telluride thermoelectrics

Synergistic modulation of mobility and thermal conductivity in (Bi,Sb)2Te3 towards high thermoelectric performance

Dramatic Enhancement of Thermoelectric Performance in PbTe by Unconventional Grain Shrinking in Sintering Process

Modulation of Vacancy Defects and Texture for High Performance N-Type Bi2 Te3 Via High Energy Refinement.

Hot Deformation Induced Multi-scale Microstructure Effect in High-performance Bismuth Telluride Based Thermoelectric Material

Thermoelectric Performance Enhancement in BiSbTe Alloy by Microstructure Modulation via Cyclic Spark Plasma Sintering with Liquid Phase

High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys

Achieving High-Performance N-Type PbTe Via Synergistically Optimizing Effective Mass and Carrier Concentration and Suppressing Lattice Thermal Conductivity

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n-type Bi<sub>2</sub>Te<sub>3</sub>

Melt-Centrifuged (bi,sb)2 Te3 : Engineering Microstructure Toward High Thermoelectric Efficiency.